Page 103 of 139

Re: Fragging Friday Every Friday 4/14/17

Posted: Fri Apr 14, 2017 9:23 pm
by Bob Dobbs
We've got a full server! Jumping on a 2nd server.

Re: Fragging Friday Every Friday 4/14/17

Posted: Fri Apr 14, 2017 10:05 pm
by mistamontiel


Is that the quirks of ball mice er .. it just grabs .. after I cut cam off even 90/45 degree turns it'll refuse .. moving left much less willingly

Seems like it wants to cooperate if I juggle it side to side a bunch .. just don't know why it's so finnicky

Re: Fragging Friday Every Friday 4/14/17

Posted: Fri Apr 14, 2017 10:07 pm
by HuntrRose
clean the dead skin off the rollers..

Re: Fragging Friday Every Friday 4/14/17

Posted: Fri Apr 14, 2017 10:16 pm
by TacT
also you can try opening up the mouse to see if there is a hair or something inside the rollers / sensors getting in the way, also i remember wrapping a small piece of clear tape evenly around the wheels for better grip and it stays cleaner longer =)

Re: Fragging Friday Every Friday 4/14/17

Posted: Fri Apr 14, 2017 10:23 pm
by HuntrRose
i clean mine just before or just after every session.. :)

Re: Fragging Friday Every Friday 4/14/17

Posted: Mon Apr 17, 2017 1:18 am
by BLueSS
So I don't have a true DC keyboard but one of the PS/2 to DC convertors. I fired up Q3 to give it a spin with my mouse/keyboard but quickly found out that my keyboard does not support multi-presses at the same time. I have to stop going forward (release w) before I can go sideways (press a, d, or w).

Is that normal for Q3? Or is it a symptom of my keyboard convertor? I tried searching the forums for "quake arena" to see what threads I could find but it complained that those are too-common of words. I wasn't sure this warranted a new thread of it's own. Thanks

Re: Fragging Friday Every Friday 4/14/17

Posted: Fri Apr 21, 2017 12:33 pm
by TacT
I'll see you all on quake tonight! =)

BLueSS wrote:So I don't have a true DC keyboard but one of the PS/2 to DC convertors. I fired up Q3 to give it a spin with my mouse/keyboard but quickly found out that my keyboard does not support multi-presses at the same time. I have to stop going forward (release w) before I can go sideways (press a, d, or w).

Is that normal for Q3? Or is it a symptom of my keyboard convertor? I tried searching the forums for "quake arena" to see what threads I could find but it complained that those are too-common of words. I wasn't sure this warranted a new thread of it's own. Thanks


I think its that total 5 adapter with some games and does that with only most of the keys on the keyboard its weird, I never bothered to mess with it. The adapter is good for mice if you can find a basic optical mouse or even Some old wireless ones will work =)

Re: Fragging Friday Every Friday 4/14/17

Posted: Fri Apr 21, 2017 1:16 pm
by BLueSS
TacT wrote:I think its that total 5 adapter with some games and does that with only most of the keys on the keyboard its weird, I never bothered to mess with it. The adapter is good for mice if you can find a basic optical mouse or even Some old wireless ones will work =)

I own a DC official mouse already, so I'm good there. :)

My keyboard adapter is the Innovation keyboard/Saturn/PS1 controller adapter. This is the one that I cannot hold two keys at the same time with.
s-l1600.jpg


Does the official DC keyboard allow multi-presses? or are other keyboard adapters known to be working with multipresses?

Seems mine is only good for chat in games. :(

Re: Fragging Friday Every Friday 4/21/17

Posted: Fri Apr 21, 2017 8:01 pm
by TacT
The official keyboard works great. I'll have to mess with it more.

Getting on quake now! =)

Re: Fragging Friday Every Friday 4/21/17

Posted: Fri Apr 21, 2017 9:07 pm
by Bob Dobbs
Be on in about 15-20 mins...about to eat dinner.