USB4MAPLE adapter

[MoeFoh]

@megavolt85
MAYFLASH F101 ARCADE STICK - D-INPUT
Perfect.
An nice entry-level budget arcade stick for around $40-$45 in the US. Highly recommended.

[megavolt85]

Mayflash F300 works! but and with the 240p it detects it as Arcade Stick, but you have to remap some buttons:

test mouse and F300

usb4maple(test MyFlash F300, Viperv2Pro).7z

(45.96 KiB) Downloaded 9 times

[Vespa]

@Vespa using a usb hub to connect both usb cables?

Just tried using a hub and same result, controls lock up until the grey usb lead is taken out, I also tried it with the hub being powered by a separate supply and that setup also exhibited the same issue (not sure this was safe, the DC fan was on even after power off, hub was powering it! O_O). It's not a big deal if vibration doesn't work, it's still an awesome option to have. I've got a Raphnet GC to USB adapter to dump which doesn't have this two lead USB setup so hopefully that will work fine with vibration. Thanks for your help!

[Vespa]

Hori DOA4 Arcade Stick 360

My DOA4 stick was/is in the process of being modded so switches were all taken out of place, I have no idea what the directions are, originally I guessed based on this picture and where the colours are leading to but cross referencing with the Hori RAP stick log, where all other buttons match, this could be wrong. Does anybody else have this stick to confirm the directional inputs once the firmware is up?

They're currently matched to inputs based on the wire colours in this pic from an online guide:

[megavolt85]

My DOA4 stick was/is in the process of being modded so switches were all taken out of place, I have no idea what the directions are, originally I guessed based on this picture and where the colours are leading to but cross referencing with the Hori RAP stick log, where all other buttons match, this could be wrong. Does anybody else have this stick to confirm the directional inputs once the firmware is up?

i'm sure what for all x360 compatible is

Code: Select all

00 14 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Up
00 14 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Down
00 14 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Left
00 14 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Right

original x360 controller, Hori RAP and Mad Catz 360 TE use same layout

[gatoh]

Mayflash F300 works! but and with the 240p it detects it as Arcade Stick, but you have to remap some buttons:

test mouse and F300usb4maple(test MyFlash F300, Viperv2Pro).7z

I think you have not attached the correct file, it does not work at all and has a modification date of April 20, 2024.

Is it correct?

Thank you!

[megavolt85]

Hori DOA4 Arcade Stick 360

added

Is it correct?

ou shit, i'm archived debug version

usb4maple(test MyFlash F300, Viperv2Pro, Hori DOA4).7z

(49.66 KiB) Downloaded 11 times

[maonaluva]

8bitdo SNES30 Wireless Bluetooth Controller

usb4maple(8bitdo SNES30, PowerA Nintendo Switch ).7z

I just tested, the SNES30 had the X and Y inverted, and the A and B were also inverted.
The PowerA Nintendo Switch worked perfectly, I even tested the second analogue in Quake 3, everything was fine.

[robinhoodie]

Tested the DOA 4 stick. It works perfectly. Thought it won't let me switch to other modes.

I want to add to the supported sticks list. What do I need to generate the log file?

[Vespa]

Tested the DOA 4 stick. It works perfectly. Thought it won't let me switch to other modes.

I want to add to the supported sticks list. What do I need to generate the log file?

Thank you megavolt for adding the stick and robinhoodie for confirming it works. Are arcade sticks supposed to have alt modes?