Same thing with 240p Test Suite - controller test -> maple devices -> jumppack test (highlight item & use left or right arrow to start the test).megavolt85 wrote:have you tested other games? Is this problem only in 4 wheel thunder or in other games too?MoeFoh wrote: Turns out not to be a power issue.
USB4MAPLE adapter
Moderators: pcwzrd13, deluxux, VasiliyRS
- MoeFoh
- Outrun
- Posts: 1109
Re: USB4MAPLE adapter
Last edited by MoeFoh on Sat Apr 20, 2024 8:45 am, edited 4 times in total.
- MoeFoh
- Outrun
- Posts: 1109
Re: USB4MAPLE adapter
@megavolt85
Do you think a wireless xbox 360 knockoff controller like this design could work? Probably, all depends on the receiver, yes?
https://www.amazon.com/Replacement-Xbox ... 0CPLPMC93/
Says "updated for 2024" - xbox slim came out in 2010!
Also, "specially designed for Americans".
Do you think a wireless xbox 360 knockoff controller like this design could work? Probably, all depends on the receiver, yes?
https://www.amazon.com/Replacement-Xbox ... 0CPLPMC93/
Says "updated for 2024" - xbox slim came out in 2010!
Also, "specially designed for Americans".
Last edited by MoeFoh on Sat Apr 20, 2024 8:11 am, edited 1 time in total.
- pcwzrd13
- Seen Any Sailors?
- Posts: 7102
- Dreamcast Games you play Online: All of them! I'm able to connect with dial-up or broadband.
- Location: USA
- Contact:
Re: USB4MAPLE adapter
The Mayflash adapter simply converts signals from a bunch of different controllers into xinput (or whatever you have it set to). So apparently input works perfectly fine but it just doesn't understand the signal sent for rumble.megavolt85 wrote:no, I don’t have this adapter, I don’t even know how it is detected by my adapter, I assume that it works like PS3 controller clones in which vibration also does not workpcwzrd13 wrote:Any idea @Megavolt?
So I've been using the adapter quite a bit and noticed that it sometimes doesn't detect the controller and I have to turn the console off and back on (sometimes a few times) for it to work. Maybe there's a bug with the controller detection?
PSO Characters:
Teal'c - lvl 119 HUcast - GC# 11666
Alto - lvl 39 FOnewm - GC# 12964
YouTube Channel : Dreamcast Live
Teal'c - lvl 119 HUcast - GC# 11666
Alto - lvl 39 FOnewm - GC# 12964
YouTube Channel : Dreamcast Live
-
- undertow
- Posts: 26
- Dreamcast Games you play Online: Ooga Booga, Tetris Online, Alien Front, 4x4 Evo
Re: USB4MAPLE adapter
Tests with Test Drive Lemans 24h: https://www.youtube.com/watch?v=SXOPpo6yBQgmegavolt85 wrote: P. S. last night they added support for the G29 steering wheel in PS4 mode, it remains to limit the movement from 900 degrees to 270
- megavolt85
- Developer
- Posts: 1904
Re: USB4MAPLE adapter
this means that Myflash does not support vibration command for x360, I have no information what command Myflash uses to enable vibrationpcwzrd13 wrote:So apparently input works perfectly fine but it just doesn't understand the signal sent for rumble.
this is more like a flash memory failure due to overclocking, try the firmware for wavesharepcwzrd13 wrote: So I've been using the adapter quite a bit and noticed that it sometimes doesn't detect the controller and I have to turn the console off and back on (sometimes a few times) for it to work. Maybe there's a bug with the controller detection?
- pcwzrd13
- Seen Any Sailors?
- Posts: 7102
- Dreamcast Games you play Online: All of them! I'm able to connect with dial-up or broadband.
- Location: USA
- Contact:
Re: USB4MAPLE adapter
That's the version I'm using.megavolt85 wrote:this is more like a flash memory failure due to overclocking, try the firmware for wavesharepcwzrd13 wrote: So I've been using the adapter quite a bit and noticed that it sometimes doesn't detect the controller and I have to turn the console off and back on (sometimes a few times) for it to work. Maybe there's a bug with the controller detection?
PSO Characters:
Teal'c - lvl 119 HUcast - GC# 11666
Alto - lvl 39 FOnewm - GC# 12964
YouTube Channel : Dreamcast Live
Teal'c - lvl 119 HUcast - GC# 11666
Alto - lvl 39 FOnewm - GC# 12964
YouTube Channel : Dreamcast Live
- robinhoodie
- undertow
- Posts: 25
Re: USB4MAPLE adapter
Just to be clear. Can the vid pid be added to the software for the device or in working with the device should I only look for controllers that have the same vid pid as a standard 360 controller?megavolt85 wrote: First, insert the controller into the PC and look at its vid pid
- megavolt85
- Developer
- Posts: 1904
Re: USB4MAPLE adapter
it's not that simple, for example the RF module from xbox360s works exactly the same as the RF module from xbox360 fat, but it just has a different PID, so I just needed to add its PID.robinhoodie wrote: Just to be clear. Can the vid pid be added to the software for the device or in working with the device should I only look for controllers that have the same vid pid as a standard 360 controller?
But for example, the Myflash adapter uses the same VID/PID as the x360 wired controller, but does not accept the vibration command.
look at what VID/PID your controllers have and let me know, and I’ll look for information on them.
It is not always possible to find information in the public domain, for example, for the Logitech G29 PS4 steering wheel I needed to take logs, @rpf16rj made a bunch of logs last night so that I could add support for this steering wheel
- pcwzrd13
- Seen Any Sailors?
- Posts: 7102
- Dreamcast Games you play Online: All of them! I'm able to connect with dial-up or broadband.
- Location: USA
- Contact:
Re: USB4MAPLE adapter
@Megavolt Any chance you can add support for the Logitech Extreme 3D Pro joystick? Would be cool to use for flight games. Not sure if it will be as easy as just adding the VID and PID but I can test it.
Info:
VID: 0x046D PID: 0xC215
Info:
VID: 0x046D PID: 0xC215
PSO Characters:
Teal'c - lvl 119 HUcast - GC# 11666
Alto - lvl 39 FOnewm - GC# 12964
YouTube Channel : Dreamcast Live
Teal'c - lvl 119 HUcast - GC# 11666
Alto - lvl 39 FOnewm - GC# 12964
YouTube Channel : Dreamcast Live