Dreamcast-Talk.com

Just wanted to let everyone know that the IP for my server changed to 198.133.10.182. Dial-up users will have to wait a bit before they can connect again as Luke needs to update his Dreamarena server (Update: Done!).

Padre wrote:I just learned that it won't connect if running through an Ethernet splitter... I have a 4 port powerline adapter which is filled up, so I got some Ethernet splitters to be able to add a couple more online devices, the weird thing is that I can connect to the internet just fine with the web browser and PSO, but quake III and Toy Racer do not connect when going through the splitter to the powerline adapter. I removed the splitter and have a connection for Toy Racer and Quake again.

This is the problem it seems. PSO and Browser work fine for me, but Quake 3 and Toy Racer dont work. I disconnected my router from my internet connection and plugged the DC directly in and I finally got past the dialog.

New problem is, I can see "Toy Server," but when I click to connect to it it sits at "connecting" and eventually gives up. I think this is more to do with my weird internet in this apartment. I'm not sure if much can be done about it, as it has that dorm room kind of setup where a CAT5 cable is just coming out of the wall.....

Quake 3 still doesn't find any servers sadly.

Is it possible to use real dial up? If so, how?

Anyone play toy racer now?

ok...I'll give it a go.

hey,

have the same probs like before with BBA, PAL Toy Racer and Pal DC... can connect to pod speed zone with or without extra opened ports but toy racer canceld the connection after 30sec of waiting...

you have any infos for me?

i can play all other games fine, have the good japanese bba... all settings are right.

mickschen wrote:i can play all other games fine, have the good japanese bba... all settings are right.

Are you using the correct IP? The one on this post is old. The newest one can be found here.

omg, yes now it works I read the hole thread about you ip changes.. maybe i tried it out with opened ports and it wont work... now my router confog is on standart, specialy no open ports and it works...

if you treid 1hour settings with changes here and changes there something then you dont know where you are sometime

EDIT: Never mind silly conflict need to specify DNS