DreamPi 1.6 Released!

[kazade]

If you've had trouble with previous releases, let me know if this improves things!

http://blog.kazade.co.uk/2016/12/dreamp ... eased.html

[TacT]

SWEET THANK YOU! XD Hope it works well i'll test it out RIGHT NOW

The link says "The address wasn’t understood"

[kazade]

Try this one: https://mega.nz/#!MIlXXZDI!kYZKdeiPh0ju ... Wv0P8ekONw

[TacT]

thanks i just figured that out XD

[mazonemayu]

I see this week's funding is already paying off

thanks buddy & keep up the good work

[sega dude]

Unfortunately, this version of DreamPi does not work with my serial modem. It seems that DreamPi detects the modem, but something goes wrong with opening the serial interface. Here is the output for SSH:

Code: Select all

Dec 10 09:17:38 dreampi Detected device ttyUSB0 with speed 115200
Dec 10 09:17:38 dreampi Internet connected and device found!
Dec 10 09:17:39 dreampi kernel: [   48.005935] uart-pl011 20201000.uart: no DMA platform data
Dec 10 09:17:40 dreampi Dreamcast IP: 192.168.1.98
Dec 10 09:17:40 dreampi Opening serial interface to ttyUSB0
Dec 10 09:17:40 dreampi Something went wrong...#012Traceback (most recent call last):#012  File "/usr/local/bin/dreampi", line 545, in main#012    return process()#012  File "/usr/local/bin/dreampi", line 474, in process#012    modem.connect()#012  File "/usr/local/bin/dreampi", line 338, in connect#012    self._serial = serial.Serial("/dev/{}".format(self._device), self._comm_speed, timeout=0)#012  File "/usr/lib/python2.7/dist-packages/serial/serialutil.py", line 260, in __init__#012    self.open()#012  File "/usr/lib/python2.7/dist-packages/serial/serialposix.py", line 280, in open#012    self._reconfigurePort()#012  File "/usr/lib/python2.7/dist-packages/serial/serialposix.py", line 413, in _reconfigurePort#012    set_special_baudrate(self, custom_baud)#012  File "/usr/lib/python2.7/dist-packages/serial/serialposix.py", line 47, in set_special_baudrate#012    FCNTL.ioctl(port.fd, TERMIOS.TIOCGSERIAL, buf)#012IOError: [Errno 25] Inappropriate ioctl for device
Dec 10 09:17:40 dreampi Stopping dcgamespy process
Dec 10 09:17:40 dreampi Stopping dcvoip process
Dec 10 09:17:41 dreampi AFO routing disabled
Dec 10 09:17:41 dreampi Dreampi quit successfully

I am using an original 256MB Raspberry Pi Model B, a Belkin F5U409 Serial to USB adapter and a CenDyne external serial 56k modem. If you need any more information, please let me know.

[kazade]

Did it work with 1.5?

[sega dude]

No, it didn't work with 1.5, but not because of this error. In 1.5, DreamPi recognized the modem and connected to it, but when I tried to dial out, nothing happened. DreamPi never acknowledged that the Dreamcast had dialed, and therefore did not connect. The only version that does work with this setup is DreamPi 1.1.

[kazade]

Interesting! Ok I have something to try for 1.7

[Bob Dobbs]

@ Kazade:
I am just reporting my isms to assist in development. I do not know if PCwzrd13 informed you but anytime after I connect to Starlancer via GD-ROM, it kills my router when attempting to "join" or "create a game. It needs rebooting at that point. It is to note that no other "anything" does that, so this is isolated to this scenario. I also know that it will not allow me to "join" a game in PBA Tour Bowling although I can connect.

This is not a complaint, I am just reporting my results.