Megavolt, I have the report structure of some logitech flight sticks too, like the Extreme 3D Pro.
Even some force feedback ones like the Force 3D and Force 3D Pro.
Also have the report for some other joystick type devices like thrustmaster HOTAS, microsoft sidewinder
Let me know if you need it.
USB4MAPLE adapter
- megavolt85
- Developer
- Posts: 1966
Re: USB4MAPLE adapter
we can start with Extreme 3D Pro since @pcwzrd has it and can test it.
there is only one more problem, DreamCast does not have such controllers, so I have no idea what layout should be made for convenient control
there is only one more problem, DreamCast does not have such controllers, so I have no idea what layout should be made for convenient control
- pcwzrd13
- Seen Any Sailors?
- Posts: 7131
- Dreamcast Games you play Online: All of them! I'm able to connect with dial-up or broadband.
- Location: USA
- Contact:
Re: USB4MAPLE adapter
Well there is the Panther DC. I just don't know what buttons are mapped to what on that controller. Pictures of it show the buttons aren't labeled. It might say in the manual. Maybe someone that owns one can chime in?megavolt85 wrote:we can start with Extreme 3D Pro since @pcwzrd has it and can test it.
there is only one more problem, DreamCast does not have such controllers, so I have no idea what layout should be made for convenient control
PSO Characters:
Teal'c - lvl 119 HUcast - GC# 11666
Alto - lvl 39 FOnewm - GC# 12964
YouTube Channel : Dreamcast Live
Teal'c - lvl 119 HUcast - GC# 11666
Alto - lvl 39 FOnewm - GC# 12964
YouTube Channel : Dreamcast Live
- pcwzrd13
- Seen Any Sailors?
- Posts: 7131
- Dreamcast Games you play Online: All of them! I'm able to connect with dial-up or broadband.
- Location: USA
- Contact:
Re: USB4MAPLE adapter
There's that as well but the Panther is closer to a flight stick. At least it's a lot closer to the Logitech Xtreme Pro. The Panther apparently works very well for games like Starlancer.megavolt85 wrote:I don't think Panther DC is suitable, maybe you meant ASCII Mission Stick
PSO Characters:
Teal'c - lvl 119 HUcast - GC# 11666
Alto - lvl 39 FOnewm - GC# 12964
YouTube Channel : Dreamcast Live
Teal'c - lvl 119 HUcast - GC# 11666
Alto - lvl 39 FOnewm - GC# 12964
YouTube Channel : Dreamcast Live
- megavolt85
- Developer
- Posts: 1966
Re: USB4MAPLE adapter
Panther DC works about the same as all axes mode
in Unreal Tournament I turned on the Panther DC setting to use both sticks
in Unreal Tournament I turned on the Panther DC setting to use both sticks
- robinhoodie
- undertow
- Posts: 27
Re: USB4MAPLE adapter
Here are some vid pids from my fightstick pile
MadCatz FightStick Neo:
Vendor ID: 0x1bad
Product ID: 0xf03a
Dead or Alive4Stick:
Vendor ID: 0x0f0d
Product ID: 0x000a
FightingStickEX2:
Vendor ID: 0x0f0d
Product ID: 0x000d
Street Fighter IV FightStick:
Vendor ID: 0x0738
Product ID: 0x4718
Generic USB Joystick (Zero Delay PCB for PS3)
Vendor ID: 0x0079
Product ID: 0x0006
Controller (Brook USB Fusion in wired Xbox 360 mode)
Vendor ID: 0x045e
Product ID: 0x028e
P3 Wired Gamepad V2.8:(Brook USB Fusion in wired PS3 mode)
Vendor ID: 0x0f0d
Product ID: 0x0022
The most important for me would be the Brook USB fusion because IF we can get this working, my plan is to build custom Twin Sticks
MadCatz FightStick Neo:
Vendor ID: 0x1bad
Product ID: 0xf03a
Dead or Alive4Stick:
Vendor ID: 0x0f0d
Product ID: 0x000a
FightingStickEX2:
Vendor ID: 0x0f0d
Product ID: 0x000d
Street Fighter IV FightStick:
Vendor ID: 0x0738
Product ID: 0x4718
Generic USB Joystick (Zero Delay PCB for PS3)
Vendor ID: 0x0079
Product ID: 0x0006
Controller (Brook USB Fusion in wired Xbox 360 mode)
Vendor ID: 0x045e
Product ID: 0x028e
P3 Wired Gamepad V2.8:(Brook USB Fusion in wired PS3 mode)
Vendor ID: 0x0f0d
Product ID: 0x0022
The most important for me would be the Brook USB fusion because IF we can get this working, my plan is to build custom Twin Sticks
- MoeFoh
- Outrun
- Posts: 1142
Re: USB4MAPLE adapter
OMG!MoeFoh wrote:@megavolt85
Do you think a wireless xbox 360 knockoff controller like this design could work? Probably, all depends on the receiver, yes?
https://www.amazon.com/Replacement-Xbox ... 0CPLPMC93/
Says "updated for 2024" - xbox slim came out in 2010!
Also, "specially designed for Americans".
100% wireless working with rumble, direct or with hub.
https://www.amazon.com/Replacement-Xbox ... 0CPLPMC93/
Receiver is emulating a wired xbox 360 controller and megavolt85's adapter likes it. Passes all test with 240p Test Suite. Power Stone playing great in 2 player mode. Rumble is a little lighter compared to the Dreamcast rumble packs and that's fine with me. Controller Ring of Lights are working properly.
Build quality is quite good for a knockoff and only costing $21 USD. Everything looks good on gamepad-tester.com. Sticks are centered with no drift. Triggers are analog and have a full linear throw. All buttons were detected as expected.
I'm using a Pico board with original firmware.
Last edited by MoeFoh on Tue Apr 23, 2024 9:38 am, edited 1 time in total.
- megavolt85
- Developer
- Posts: 1966
Re: USB4MAPLE adapter
@MoeFoh WTFyou really surprised me, in my memory this is the first time that a Chinese fake matches the original
- MoeFoh
- Outrun
- Posts: 1142
Re: USB4MAPLE adapter
Me, too. I didn't know what I was getting into. Worked flawlessly first time after pairing - no troubleshooting needed.megavolt85 wrote:@MoeFoh WTFyou really surprised me, in my memory this is the first time that a Chinese fake matches the original
Was testing 2 player Under Defeat - English translated version. If time permits could you look into adding analog stick support for the game? It's d-pad only. Maybe you've aleady updated this game, I'm not sure.
Last edited by MoeFoh on Sun Apr 21, 2024 9:43 am, edited 1 time in total.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 5 Replies
- 3731 Views
-
Last post by segalover08
-
- 2 Replies
- 3909 Views
-
Last post by RightSprite UK
-
- 3 Replies
- 4188 Views
-
Last post by mstar
-
- 390 Replies
- 236911 Views
-
Last post by megavolt85
-
- 6 Replies
- 5070 Views
-
Last post by Ian Micheal