Dreamcast-Talk.com

Hello

I wish open menu had the covers and preview of retrodream

Dancing Aero

Aero Dancing

Aero Dancing

Anyone ever have their SD card or serial port stop working

Fuck da PS2.

Ferrari F355 Online TODAY, May 11th @ 8pm UK

IMPORTANT:
Go to the "Player Entry" Lobby at EXACTLY the times below.:

(UK time):
8.00pm - Motegi
8.15pm - Suzuka Short
8.30pm - Monza
8.50pm - Sugo
9.10pm - Suzuka
9.30pm - Long Beach

RULES:
No Hiro-Shifting, No Nazo-drifting.

Join the event here: https://discord.gg/PrVrjN6XmF?event=1358679283651973242

Yeah Naomi is the arcade version similar to dreamcast hardware, If I'm not mistaken it has 8MB of audio RAM, 16 MB of VRAM, 32 MB of Main RAM

Oh, thx man!

Naomi is the arcade board that's similar to Dreamcast hardware

also what's a sega naomi? i recently just heard about it

whoa, technology stuff

All builds are subject to random failures. You can close the prompt and start over and it will begin where it left off. This may happen multiple times before completion.

@al73r Have you checked the logs or tried a clean rebuild? Sometimes clearing the cache can help too. Oddly enough, I'm troubleshooting a similar hang in a completely different space—working on some furniture ecommerce rendering where a stuck build caused all 3D assets to hang. Tech gremlins don’t discriminate

0 [main] make 42440 open_stackdumpfile: Dumping stack trace to make.exe.stackdump

miami is building now but it suddenly stopped on this line

welp got it workin!

wonder why its doing that

hmm that is pointing at the wrong location for the repack that was created

hmm getting this error now

Assertion failed: removedTexture, file ../src/tools/texconv.cpp, line 366
make: *** [repack-data/liberty/models/menu.txd] Error 3

readme is totally different in beta

yeah I see tha tnow!

You can find beta build instructions on the main gitlab page.

There's a completely different structure between alpha and beta. You can't rename the ELF, you need to copy the repository anew and build from scratch. If you have an old folder structure, the naming will be off. And the executable will not dupe the conversion programs properly.

the img is in that folder yet the tool can't find it hmmm

well what is going on here make: *** No rule to make target `../../liberty/models/gta3.img', needed by `repack-data/unpacked'. Stop

the best of them, tougher than leather

here i come, rougher than the rest of them

had to install the offline version, rename the liberty.elf to dca3.elf, and run source /usr/opt/toolchains/dc/kos/environ.sh

hmm my kallistios is not instlaling in dreamsdk :-/

/opt/toolchains/dc/kos/utils/makeip/makeip ip.txt IP.BIN
kos-objcopy -R .stack -O binary dca3.elf dca3.elf-prebuilt.bin
F:\DreamSDK\msys\1.0\opt\toolchains\dc\sh-elf\bin\sh-elf-objcopy.exe: 'dca3.elf': No such file
make: *** [1ST_READ_PREBUILT.BIN] Error 1

grr

Snes4all is more optimized than dreams es. I will post both in my post. Will have a breakdown for SSD/SD/hd users and gemu

There are no SNES emu with full speed across the board, only specialized images with optimized settings for specific romsets. I don't recall them off hand but I know I've seen them.

well I got mame fully working but the rom set is meh... almost don't want to include it in the post - i do have a full mame romset I could update it with but i'm not sure its worth the effort viewtopic.php?t=13356

need to get a mame iso release and we are looking golden for a big write up

aww yeah neo geo locked in

I do wish dreamsnes ran a bit smoother.. needs a bit more optimization .. anyone know of a snes emulator that runs full speed?

aww yeah I have a release of dreamsnes098 with a full rom set incoming!

woo fixed the IMR xmas release on ssd!!

the imr xmas release only launches off sd cards atm .. not sure what to change to make it work off ssd/hd

extracted it as .raw and .wav .. now to figure out how the cdda emulation works to properly launch this title

has a cdda track

hmm .. this dreamsnes 497 roms cdi doesn't have a 1st_read.bin

now where does it display the game name? on the VMU/USB4MAPLE/Dreamshell launcher

hmm I kinda want to fix the title as it says "ghetto pong" on the usb4maple output

this works really wel

likes this message

al73r wrote: ↑Sun May 04, 2025 12:34 pm Woo 2 for 2 .. nesterdc working

Woo 2 for 2 .. nesterdc working

Working on nesterdc right now and will be testing sd and ssd launching fingers crossed!

I'm fixing all these releases for SD/SSD/HD launching right now .. so far the xmas release motivated me once i got that working .. I loved it so much it put a smile on my face

Yeah, his holiday releases kick ass.

Ian this xmas release is ridiculous

OH hell ya! Ian I ran the sed command on your xmas release and it fixed my 1st_read.bin

likes this message

masis08 wrote: ↑Sun May 04, 2025 5:07 am F355 TODAY, Sunday May 4th @ 8pm UK

IMPORTANT:
Go to the "Player Entry" Lobby at EXACTLY the times below.:

(UK time):
8.00pm - Motegi
8.15pm - Suzuka Short
8.30pm - Monza
8.50pm - Sugo
9.10pm - Suzuka
9.30pm - Long Beach

RULES:
No Hiro-Shifting, No Nazo-drifting.

Join the event here: https://discord.gg/PrVrjN6XmF?event=1358679283651973242

F355 TODAY, Sunday May 4th @ 8pm UK

IMPORTANT:
Go to the "Player Entry" Lobby at EXACTLY the times below.:

(UK time):
8.00pm - Motegi
8.15pm - Suzuka Short
8.30pm - Monza
8.50pm - Sugo
9.10pm - Suzuka
9.30pm - Long Beach

RULES:
No Hiro-Shifting, No Nazo-drifting.

Join the event here: https://discord.gg/PrVrjN6XmF?event=1358679283651973242

I need to load up my linux machine and get all the tools setup

oh man MastaG on this forum has the secret sauce to fixing CDI to ISO images

And finally.. looks like older emulation needs to be done on an sd card with this setup gdemu has no issues i believe because it loads slower so it is able to load properl

nope nevermind after some more testing ssd doesn't work as well as a spinning drive consistently gets hung up in areas. Not sure if the ssd is too fast or what. The IDE also glitched out in certain areas so I wouldn't say its flawless .. it has its quirks and we cannot save to a memory card as it doesn't detect one. I would happily pay for a bleem license if it meant a significant improvement over the free or whatever release this is

so it wasn't ssd or ide issue its just trying to move too quickly between loading initially and hitting start

hmm .. seems to be an ssd issue .. ide worked flawless

doesn't allow you to actually play

@megavolt - looks like after hitting the start button on the main title screen for Casltevania it just goes into a loop

likes this message

blank wrote: ↑Sat May 03, 2025 6:23 pm thanks for trying to help. ill keep trying things and hopefully its eventually work.

thanks for trying to help. ill keep trying things and hopefully its eventually work.

closest I can get https://i.imgur.com/SNHjANb.jpeg

i dont' get why its so challenging

and i'm over here trying to simply launch this iso - viewtopic.php?t=18334

likes this message

Falco Girgis wrote: ↑Sat May 03, 2025 6:18 pm Ughghghghghg.... up all night optimizing GTA3/VC. lol.

Ughghghghghg.... up all night optimizing GTA3/VC. lol.

only thing I can think of is the browser you are using

from what you ahve shared you show up online so I dont' get it

did you ensure you setup the dial number 111-1111 and the dns properly as on the setup page in dreamcastlive

recap: im using a dreamcast with a GDEMU and a copy of phanasy star online v2. I am using a dream pi kit bought from the dreamcast live website. it is set up and connected. I used web browser 2.0 so set up the connection as instructed. I try to go online I use the codes included in the copy of pso I have then the codes for v2 it asks for that I don't have but found online. I appear as online on the website but never actually get into the game. it sticks at the loading screen, and disconnects.

oh. um im not sure the set came pre put together.

https://dreamcastlive.net/downloads/

I don't think im using either and that link isn't working for me

Megavolt - the name of the game does show up on a USB4MAPLE screen!

are you using the gdi or cdi from dreamcastlive - https://dreamcastlive.net/files/xdp_le_r4.zip

im sorry but I don't know what you mean.

I have used the gdemu - you could try a different browser igp, xgp, and there is another one

when I try to connect I see myself appear on the dreamcast now website.

yeah I got the full kit

dreampi

if you got the 56k modem do you have a dream pi and 56k modem with a 9v(18v) voltage injector?

whats your setup? 56k modem or BBA

says line disconnected due to network error.

ah, hi? so hey, can anyone help? I just got my dreamcast set up online and tried to connect to PSO and like... it connected but then stuck on the loading screen and canceled out. am I doing something wrong? my setup is an actual dreamcast with a GDEMU cuz disk drive died and a copy of PSO v2.

I tried to use a cdi to iso converter with out much luck . GDEMU just plays the CDI so that was my logic behind that

my lack of development knowledge on DC i think is limiting me as I don't know much about the memory location options along with the loader options so its been trial and error going through settings one by one

i been beating my head against the wall the last couple days. I dont' understand why the ISOs built for dreamshell are not loading up. I got close but it froze at the sega and dcswat splash screen

I'm just happy to see an emulator finally working

Hell yea!!

to change the cover and title I need to write a program, but at least you have the ability to quickly create images and test them

hmm now to update the cover art!

even worked with the ssd as well

the cover art is wrong but it worked!