This new Support Forum is where all existing and future help topics should go. If you need technical help for the Dreamcast console, accessories and...
Last post
Is there an updated list with all of non-patchable vga games for the dreamcast?
so i recently dug out my dreamcast with the GDEMU and a laserbear 3d printed sd card mount. when i turn the console on the fan seems a bit loud not...
Last post
Is there a lot of visible dust and dirt? Just disconnect, give it a good clean with a toothbrush and apply some waterproof gear grease to the bearing...
Hello friends, i have some questions someone can help
1 - DC PAL console with GDEmu unsing GDI format / NTSC games the console will output a real...
Last post
The console has a setting in flash memory for video broadcast - PAL, NTSC and Brazil PAL M if I remember. If you are using the standard AV cable and...
I have a Dreamcast that worked fine up until a few years ago - then it would freeze on the Dreamcast logo/boot screen. Today I finally installed a...
Last post
Could be bad or dirty connection on the PSU power pins on the motherboard, try cleaning them and check if need to bend them back into place to make a...
Has anyone noticed a glitch when trying to play this game? The game loads okay but when you get to the character select screen, the game slows right...
Last post
Has anyone noticed a glitch when trying to play this game? The game loads okay but when you get to the character select screen, the game slows right...
I got a GDEMU clone V 5.20.5 from AliExpress together with the base memory card to get you going. It contained the standard GDEMU.ini file:
open_time...
Last post
Do you buy groceries in the store using the same principle?
You rake everything into a cart, bring it home, put it in the refrigerator, and then...
I have a small hobby (trying to) repair broken Dreamcasts. I’ve seen a common trend with a lot of early Japanese VA0s is that the small motor gear on...
Last post
I don't, but do you have a central repository where you document your findings?
So I was shell swapping my dreamcast and noticed that the output slot was broken off and I tried soldering it back on. When I soldered the pins back...
Last post
If the connector was damaged, you might still be able to salve the console by way of wiring up an audio/video connection from the points on underside...
Hey fellas so lately I been wanting to mod my Dreamcast except im not sure how to go about it. To start is it better to do GDEMU or Serial Port mod?...
Last post
The data transfer speed of the serial port is pretty bad compared to the GD-Rom drive, so there aren't many games that you can play and have a good...
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
