Dreamcast Arcade Stick Upgrades

General Dreamcast discussion applies here. Before posting here please check the other forums in the Dreamcast section to see if your topic would fit better in those categories.

Moderators: pcwzrd13, mazonemayu

Forum rules
Please check the other forums in the Dreamcast section before posting here to see if your topic would fit better in those categories. Example: A new game/homebrew release would go in the New Releases/Homebrew/Emulation section: http://dreamcast-talk.com/forum/viewforum.php?f=5 or if you're having an issue with getting your Dreamcast to work or a game to boot it would go in the Support section: http://dreamcast-talk.com/forum/viewforum.php?f=42
MikeStutzzzz
Outrun
Posts: 1132

Dreamcast Arcade Stick Upgrades

Post#1 » Tue May 25, 2021 10:50 pm

recently purchased an Arcade stick from japan since the thing is pretty old the buttons seem to stick etc. watching some youtube videos was going to mod and replace them which would require some soldering etc. To my surprise focus attack actually offers adapters and will now make custom front Panels.

https://focusattack.com/search.php?search_query=HKT

will post pics of the outcome.
Meh Stuff http://dreamcast-talk.com/forum/viewtopic.php?p=18650#p18650
Before you download meh mirrors read this
http://dreamcast-talk.com/forum/viewtopic.php?f=2&t=2353&p=22482#p22482

User avatar
dubcity
Super Sonic
Posts: 1576

Re: Dreamcast Arcade Stick Upgrades

Post#2 » Sat May 29, 2021 10:26 am

Dreamcast Green Goblin mod guide I found on youtube. pretty sure you saw this while looking for how to videos. I hate soldering so the focus attack mods look great. hopefully they work out for you.


MikeStutzzzz
Outrun
Posts: 1132

Re: Dreamcast Arcade Stick Upgrades

Post#3 » Wed Jun 02, 2021 2:04 pm

Yeah I went off his guide for the most part. Just needed to dremmel some extra parts off cables worked great from focus attack, the only thing you need to do is use a flathead screwdriver and flip the left and right directions on the wires that go to the arcade stick. But all of this can be done without soldering. Now if you don't want to dremmel off the front part you can get a custom front by focus attack to replace the current plate and use all the same cables they provide. But if you want the new arcade stick with hex directions instead of 4 you need to dremmel that stuff out. If you are cool with 4 it looks like you can use the current brackets.
Meh Stuff http://dreamcast-talk.com/forum/viewtopic.php?p=18650#p18650
Before you download meh mirrors read this
http://dreamcast-talk.com/forum/viewtopic.php?f=2&t=2353&p=22482#p22482

User avatar
dubcity
Super Sonic
Posts: 1576

Re: Dreamcast Arcade Stick Upgrades

Post#4 » Wed Jun 02, 2021 4:37 pm

ok nice! I'll keep that in mind

User avatar
fraggle200
chill
Posts: 307

Re: Dreamcast Arcade Stick Upgrades

Post#5 » Fri Jun 04, 2021 7:23 am

I've ended up with 3 sticks recently and plan on modding all of them. 2 will remain mostly faithful to Sega colours. 1 green, 1 pink. The other one I was thinking of sticker bombing under a clear faceplate from Focusattack but I'm not entirely sure if I'll end up with too much height from the stickers to get a nice smooth finish at the edges of the faceplace or if it's just going to get raised up too much.

Any ideas? Ideally I'd want a sticker bomb sheet thats been printed that I can just cut as I need it but I've not found one yet with DC game logos on it. Have just resigned myself to buying a load of stickers from Redbubble and diy'ing it.

MikeStutzzzz
Outrun
Posts: 1132

Re: Dreamcast Arcade Stick Upgrades

Post#6 » Tue Aug 03, 2021 10:48 pm

fraggle200 wrote:I've ended up with 3 sticks recently and plan on modding all of them. 2 will remain mostly faithful to Sega colours. 1 green, 1 pink. The other one I was thinking of sticker bombing under a clear faceplate from Focusattack but I'm not entirely sure if I'll end up with too much height from the stickers to get a nice smooth finish at the edges of the faceplace or if it's just going to get raised up too much.

Any ideas? Ideally I'd want a sticker bomb sheet thats been printed that I can just cut as I need it but I've not found one yet with DC game logos on it. Have just resigned myself to buying a load of stickers from Redbubble and diy'ing it.


https://u.pcloud.link/publink/show?code ... ftzQvg84q7
Forgot to Post a Link (also has PSO download if anyone needs it)

This is how mine turned it it feels really good with Siemetsu buttons and sanwa stick I did need to dremmel out some parts but it fits really good. the only thing I needed to do was switch two wires from the adapter on focus attack just need to use a small flat head to pull and move. Another cool thing is Focus attack includes adapters for all the buttons etc so you don't need to worry about any soldering. after having a friend over and did some fighting games actually thinking of getting another one and converting. Another thing I own is the blissbox usb adapter which also works with the arcade stick so after making my own dc cable (he was out of stock at the time) It works great on PC as well.
Meh Stuff http://dreamcast-talk.com/forum/viewtopic.php?p=18650#p18650
Before you download meh mirrors read this
http://dreamcast-talk.com/forum/viewtopic.php?f=2&t=2353&p=22482#p22482

User avatar
fraggle200
chill
Posts: 307

Re: Dreamcast Arcade Stick Upgrades

Post#7 » Wed Aug 04, 2021 3:42 am

MikeStutzzzz wrote:
fraggle200 wrote:I've ended up with 3 sticks recently and plan on modding all of them. 2 will remain mostly faithful to Sega colours. 1 green, 1 pink. The other one I was thinking of sticker bombing under a clear faceplate from Focusattack but I'm not entirely sure if I'll end up with too much height from the stickers to get a nice smooth finish at the edges of the faceplace or if it's just going to get raised up too much.

Any ideas? Ideally I'd want a sticker bomb sheet thats been printed that I can just cut as I need it but I've not found one yet with DC game logos on it. Have just resigned myself to buying a load of stickers from Redbubble and diy'ing it.


https://u.pcloud.link/publink/show?code ... ftzQvg84q7
Forgot to Post a Link (also has PSO download if anyone needs it)

This is how mine turned it it feels really good with Siemetsu buttons and sanwa stick I did need to dremmel out some parts but it fits really good. the only thing I needed to do was switch two wires from the adapter on focus attack just need to use a small flat head to pull and move. Another cool thing is Focus attack includes adapters for all the buttons etc so you don't need to worry about any soldering. after having a friend over and did some fighting games actually thinking of getting another one and converting. Another thing I own is the blissbox usb adapter which also works with the arcade stick so after making my own dc cable (he was out of stock at the time) It works great on PC as well.


Well I've done both my green and pink sticks in the exact same way as you, only I've went with Sanwa hardware. they look amazing. I found the same thing with the stick harness about switching left and right wires. easily done once you realise you need to do it. Still not sure why FA have persisted in selling ones where they expect the pcb to be upside down.

green+pink sticks.jpg


Have also got around the stickerbomb I was thining about for my 3rd by just using the plexi option from Focus Attack and getting a pre-bombed sheet printed which will save on height and cos of all the stickers.

Here's a mockup of it. Should be with me in about a month or so hopefully.

Capture.PNG

User avatar
dubcity
Super Sonic
Posts: 1576

Re: Dreamcast Arcade Stick Upgrades

Post#8 » Wed Aug 04, 2021 4:48 am

Looks great man

MikeStutzzzz
Outrun
Posts: 1132

Re: Dreamcast Arcade Stick Upgrades

Post#9 » Wed Aug 04, 2021 10:40 pm

Nice yeah the sticker bomb looks cool. From what I understand the reason why Focus attack has it that way is because they expect you to keep the brackets or something yeah think I may just need to purchase a second stick and upgrade.
Meh Stuff http://dreamcast-talk.com/forum/viewtopic.php?p=18650#p18650
Before you download meh mirrors read this
http://dreamcast-talk.com/forum/viewtopic.php?f=2&t=2353&p=22482#p22482

User avatar
fraggle200
chill
Posts: 307

Re: Dreamcast Arcade Stick Upgrades

Post#10 » Thu Aug 05, 2021 5:32 am

MikeStutzzzz wrote:Nice yeah the sticker bomb looks cool. From what I understand the reason why Focus attack has it that way is because they expect you to keep the brackets or something yeah think I may just need to purchase a second stick and upgrade.



100% that that's the case. looking at their "guide" on the page for the harness I think they're wanting you do it that way as it's the least destructive way of upgrading the stick. Which makes sense to a point but if you're going to replace literally everything else to do with the lever, what's the point of not doing the last bit?

  • Similar Topics
    Replies
    Views
    Last post

Return to “Lounge”

Who is online

Users browsing this forum: No registered users