Loose jump pack motor
Moderator: pcwzrd13
- killer-elite
- blackout!
- Posts: 140
- Joined: Mon Sep 18, 2017 11:10 am
- Dreamcast Games you play Online: All of them
Loose jump pack motor
Hey guys I bought a Puru Puru Pack from Japan and the motor inside is really loose to the point where if I shake the device I can hear it raddle around inside. I ended up opening it up and noticed the foam that keeps it in place has shrunk from age, Does anyone have any foam tape recommendations so that I can replace it?? I was thinking of using gorilla tape to put on top of the original foam but from experience that tape isn't the best for a long term solution as it has a tendency to peel away with time. Thanks.
- killer-elite
- blackout!
- Posts: 140
- Joined: Mon Sep 18, 2017 11:10 am
- Dreamcast Games you play Online: All of them
Re: Loose jump pack motor
Update I ended up opening up the Jump Pack and measured how wide and thick it is for a replacement. I found a 1/2" wide and 1/8 thick substitute on amazon for 8 bucks, Its a little bit wider then the original foam but figured I can always cut it to size.
- Dreamcazman
- fire
- Posts: 77
- Joined: Mon Nov 12, 2018 6:42 pm
- killer-elite
- blackout!
- Posts: 140
- Joined: Mon Sep 18, 2017 11:10 am
- Dreamcast Games you play Online: All of them
Re: Loose jump pack motor
That is a good idea, I do have a glue gun but I want to try to keep things as original as possible...Dreamcazman wrote:A touch of hot glue would serve the same purpose.
- mistamontiel
- Shark Patrol
- Posts: 1959
- Joined: Thu Jul 19, 2012 5:19 am
- Dreamcast Games you play Online: Errythan except Tetris o.0
- Location: Miami, FL, CUBA
- Contact: