Sega Memory Card 4X not working

Technical help for Dreamcast console, accessories and games only. Ask questions and find answers here. For Online help see the Online Forum

Moderator: pcwzrd13

User avatar
VirtuaShenmue
fire
Posts: 84

Sega Memory Card 4X not working

Post#1 » Wed Aug 03, 2022 4:32 pm

I bought a 4X memory card (the Sega official one).
Unfortunately it doesn't work, it doesn't appear in the memory manager at all (so I can't even format it or access it in any way).

Inserting and removing the memory card multiple times doesn't seems to change anything.
The light works when connected, so at least it receive power, but the button for the bankswitching doesn't seems to work as well.

I tried using it with different controllers, tried even on Dreamcast port 3 and 4, but nothing.

Is there a way to fix or it's better to just return it?
Thanks

User avatar
Sboomboom
shadow
Posts: 7

Re: Sega Memory Card 4X not working

Post#2 » Wed Aug 03, 2022 10:17 pm

I had the same problem. I took it apart and saw that it had a little piece of T-1000 was not soldered down. Probably from dropping. I didn't have an iron or Robert Patrick around so I heated up the tip of a small screwdriver and performed successful surgery. Its been multiple years and moves and no problems since. Just take a rip or a sip and I'll bet you can open it up and get it done! Or you can just return it lol

User avatar
VirtuaShenmue
fire
Posts: 84

Re: Sega Memory Card 4X not working

Post#3 » Thu Aug 04, 2022 8:53 am

Lol, thank you :D
I opened it, but I can't find anything strange, but I'm not an expert.

Do you see something suspect on my board? Also where was located the issue in your case?

Image

Image

User avatar
Sboomboom
shadow
Posts: 7

Re: Sega Memory Card 4X not working

Post#4 » Thu Aug 04, 2022 4:15 pm

I don't see anything jumping off at me. Mine was broken in 2 places noticeably, but in the pic yours looks good there. Perhaps it got wet? I'm sorry its not much help but thanks for having the courage to open it up.

52262641676_b448d44d88_k.jpg
the arrows were where mine was broken.

User avatar
VirtuaShenmue
fire
Posts: 84

Re: Sega Memory Card 4X not working

Post#5 » Thu Aug 04, 2022 4:37 pm

thanks, don't worry, opening is easy and safe as long you are careful.

tomorrow I'll try to investigate further that part.
When you had the issue, you too had the led light ON and the bank switching button not working, right?

User avatar
VirtuaShenmue
fire
Posts: 84

Re: Sega Memory Card 4X not working

Post#6 » Fri Aug 05, 2022 11:44 am

another photo with the detail of the connectors, maybe it's more clear

Image

User avatar
VirtuaShenmue
fire
Posts: 84

Re: Sega Memory Card 4X not working

Post#7 » Sun Aug 07, 2022 10:37 am

before giving up, does someone has the schematics for the memory 4X ?

User avatar
Sboomboom
shadow
Posts: 7

Re: Sega Memory Card 4X not working

Post#8 » Mon Aug 08, 2022 10:21 pm

Ithe only thing odd I see is in the last pic is on the right side, its the only discoloration on the whole board. Like its been burnt. Also the connector below the 7 looks different.

User avatar
VirtuaShenmue
fire
Posts: 84

Re: Sega Memory Card 4X not working

Post#9 » Sat Aug 13, 2022 6:28 am

Sboomboom wrote:Ithe only thing odd I see is in the last pic is on the right side, its the only discoloration on the whole board. Like its been burnt. Also the connector below the 7 looks different.


You mean the discoloration around letters HCMK?
Shouldn't be the flux used for soldering?

User avatar
VirtuaShenmue
fire
Posts: 84

Re: Sega Memory Card 4X not working

Post#10 » Wed Feb 01, 2023 10:32 am

Up in case anyone can figure it out

  • Similar Topics
    Replies
    Views
    Last post

Return to “Support”

Who is online

Users browsing this forum: No registered users