issues with openmenu and codebreaker

[dreamcast459]

so im pretty sure i have the ;latest openmenu downloaded to my pc and im using gdmenu card manager to install my gdemu .gdi and .cdi game files. but for one none of the artwork for my games shows up when i boot into openmenu and i also cant get the built in code breaker to work please help

[megavolt85]

all symptoms indicate that you are using an old version from gihub mrneo240
https://github.com/megavolt85/openmenu/ ... u_11.03.24

[dreamcast459]

all symptoms indicate that you are using an old version from gihub mrneo240
https://github.com/megavolt85/openmenu/ ... u_11.03.24

do you have a step by step install guide so i can install the files needed to use openmenu with gdemu card manager?

[megavolt85]

unpack folder menu_data from archive menu_data_11.03.24.7z to GDMENUCardManager\tools\openMenu\

[dreamcast459]

unpack folder menu_data from archive menu_data_11.03.24.7z to GDMENUCardManager\tools\openMenu\

still cant figure out how to enable codebreaker i highlight the game in the menu list and press the B button and nothing happens if i press Y it goes to the dc bios menu if i press X nothing happens and if i press A it loads the games any ideas what im doing wrong?

[megavolt85]

if i press Y it goes to the dc bios menu

Does it immediately exit into the BIOS or does a confirmation window appear?

[dreamcast459]

if i press Y it goes to the dc bios menu

Does it immediately exit into the BIOS or does a confirmation window appear?

if i press the y button while im at the openmeu screen after powering on the DC it goes straight to the bios

[dreamcast459]

if i press Y it goes to the dc bios menu

Does it immediately exit into the BIOS or does a confirmation window appear?

i should note if i press the start button a menu appears allowing me to adjust some basic settings but thats about it edit im also using the latest version of gdmenu card manager

[megavolt85]

if i press the y button while im at the openmeu screen after powering on the DC it goes straight to the bios

this means that your SD card still has an old version of openmenu.
after you updated the openmenu on the PC, did you insert your SD card into the PC and update the menu on the SD using the "Save changes" button in GDMENU Card manager?

[dreamcast459]

if i press the y button while im at the openmeu screen after powering on the DC it goes straight to the bios

this means that your SD card still has an old version of openmenu.
after you updated the openmenu on the PC, did you insert your SD card into the PC and update the menu on the SD using the "Save changes" button in GDMENU Card manager?

i think so im gonna format the sd card and start over ill report back