Adapter for MAPLE (Release)

Place for discussing homebrew games, development, new releases and emulation.

Moderators: pcwzrd13, deluxux, VasiliyRS

User avatar
s_d_a_i
undertow
Posts: 32

Re: Adapter for MAPLE (Release)

Post#41 » Wed Oct 07, 2020 1:50 am

Wow, that was fast! Tomorrow my blue pill will arrive, I will test it as soon as it comes.

Thank you very much megavolt85!

User avatar
s_d_a_i
undertow
Posts: 32

Re: Adapter for MAPLE (Release)

Post#42 » Thu Oct 08, 2020 4:34 pm

Hi megavolt85,
it didn't work for me, maybe it is because I don't have the SPI memory connected, it will take a couple of days to arrive, I've checked if the code was correctly uploaded to the Blue Pill and it was, tested with an STM32 and a CS32 clone as well.

test.jpg


:(

I will try again when the SPI memory arrives.

User avatar
megavolt85
Developer
Posts: 1782

Re: Adapter for MAPLE (Release)

Post#43 » Thu Oct 08, 2020 5:16 pm

no, everything should work without SPI memory
check if the controller is displayed in the BIOS?

User avatar
s_d_a_i
undertow
Posts: 32

Re: Adapter for MAPLE (Release)

Post#44 » Thu Oct 08, 2020 6:04 pm

No, the controller is not available on the file menu, maybe something is wrong with the cable I'm using.

User avatar
megavolt85
Developer
Posts: 1782

Re: Adapter for MAPLE (Release)

Post#45 » Thu Oct 08, 2020 6:26 pm

maybe the problem lies elsewhere
before sending a response, a delay of at least 50 nanoseconds is needed, I did not make this delay because polling a controller is always longer, but now I do not need to poll another controller, and polling buttons is less than fifty nanoseconds
I updated the attachment in my previous post, test the updated firmware

User avatar
s_d_a_i
undertow
Posts: 32

Re: Adapter for MAPLE (Release)

Post#46 » Fri Oct 09, 2020 2:56 am

Definitely a problem on my side, I've tested the latest firmware you've attached and the firmware from the first post and it is still not visible, so I will test with another cable.

User avatar
s_d_a_i
undertow
Posts: 32

Re: Adapter for MAPLE (Release)

Post#47 » Fri Oct 09, 2020 4:34 pm

Hi again megavolt85, sorry for the spam.

I've got the SPI memory but of course I don't know if it is working, I've tested the latest firmware with a new cable I've used before with a DC controller, the cable works fine with the DC controller.

I tried multiple pills even with the CH32 clone, no luck, I will try to check with a borrowed oscilloscope just to be sure nothing is wrong, my DC is a japanese Ugo Denshi version, just in case it matters.

I've soldered the SPI memory with your specs but I'm unable to test it currently. Maybe something is wrong with my Blue Pills, it is difficult to check if it is a clone or a real one, but I've seen on this thread pics some clones working.


spi10k.png

test_w_spi.png

User avatar
megavolt85
Developer
Posts: 1782

Re: Adapter for MAPLE (Release)

Post#48 » Fri Oct 09, 2020 6:25 pm

Is your dreamcast overclocked?

User avatar
s_d_a_i
undertow
Posts: 32

Re: Adapter for MAPLE (Release)

Post#49 » Fri Oct 09, 2020 6:30 pm

megavolt85 wrote:Is your dreamcast overclocked?


I don't think so, I've bought it second hand so I'm not sure if the previous owner overclocked it.

User avatar
megavolt85
Developer
Posts: 1782

Re: Adapter for MAPLE (Release)

Post#50 » Fri Oct 09, 2020 6:38 pm

second led blink?

the controller was always in USB mode
fixed and updated the firmware in the last post, redownload

  • Similar Topics
    Replies
    Views
    Last post

Return to “New Releases/Homebrew/Emulation”

Who is online

Users browsing this forum: Majestic-12 [Bot]