Quake 3 Arena config

[jervisx]

The primary DNS to use for a BBA would be 46.101.91.123 (You can use anything for the secondary DNS. I use 8.8.8.8). You can use Dreamcast-Talk's IP as Mechanic mentioned above but then you won't be able to connect with other games (POD, Toy Racer, etc.). You cannot use 0.0.0.0 with the BBA. That's only if you're using DreamPi as DreamPi automatically handles the DNS server.

PCwzrd13 and I are set up the same and I do use a BBA and get the master server list every time. Please note that l use the Q3 LAN 2 option with that setup, yes there are TWO options. I have never tried it with my DreamPi but maybe it is time to do so for test purposes. I have with my Netopia setup successfully.

Where do you find the 2nd LAN option??

[Bob Dobbs]

Sorry, the LAN connection is only 1 option but my Dial-up has 2 options. My first is for Netopia method (LANmodem) and the 2nd one is for DreamPi (see attached image). Being you are BBA, you should not have a problem following the previous.

Dial-Up Screen

[Mechanic]

The primary DNS to use for a BBA would be 46.101.91.123 (You can use anything for the secondary DNS. I use 8.8.8.8). You can use Dreamcast-Talk's IP as Mechanic mentioned above but then you won't be able to connect with other games (POD, Toy Racer, etc.). You cannot use 0.0.0.0 with the BBA. That's only if you're using DreamPi as DreamPi automatically handles the DNS server.

finally got around to trying 46.101.91.123 dns in my bba q3 network screen and q3 master list wont show

If I ping dreamcast talk and use that ip as the dns the master list shows
Current dc talk ip
100.10.44.100
Worked with pod but haven't tried toyracer

[pcwzrd13]

finally got around to trying 46.101.91.123 dns in my bba q3 network screen and q3 master list wont show

That's because DC-Talk's IP changed again after they moved the server. Kazade needs to update the DNS.

[ruthyard]

I'm using my BBA. I was able to find the server by finally just doing an address search via Info. I can't get the server listing to pop up by default for whatever reason.

I use:
IP: 192.168.0.97
SubNet: 255.255.255.0
DNS1: 46.101.91.123
DNS2: 8.8.8.8

I get master list every time.

What do I put for my gateway?

[ruthyard]

Nevermind, I got it to work. I got the master list to show up. See you guys online.

[Bob Dobbs]

Nice job, Ruthyard.

[asiergcfg]

Hi! I realize this is an old thread, but I've trying to follow the instruction posted here and got no results in Quake III.

I am using a BBA, with the parameters set as pwcrd says, and that way I can connect onto PSO's servers, but no other game works for me. Quake III no master server, even if I type the IP of a particular server nothing comes up. I have tried Unreal, Toy Racer and POD2 and in all of them I get error from server (using Kazade's DNS server). Can anyone direct me into getting them to work? Thanks!