Hello a novice here, of the three versions of DC I seem to have the version 2, where the gd rom is all plastic. My DC wont spin discs any more and the screw turn technique worked for a little bit but not anymore. On ebay the replacement gd rom seem like all the ones that just snap into the slot, but version 2 does not seem would work. Also GDEMU seems a non option.
So for version 2 Dreamcast what are options to fix the gd rom ? Thanks.
Dreamcast HKT-3020
Manufactured October 2000
Version 2 NTSC
Dreamcast v2 GD ROM replacement possible ?
Moderator: pcwzrd13
- Xiden
- Developer
- Posts: 2225
- Dreamcast Games you play Online: All the DC games!!
Re: Dreamcast v2 GD ROM replacement possible ?
Edit deletedmscotz wrote:Hello a novice here, of the three versions of DC I seem to have the version 2, where the gd rom is all plastic. My DC wont spin discs any more and the screw turn technique worked for a little bit but not anymore. On ebay the replacement gd rom seem like all the ones that just snap into the slot, but version 2 does not seem would work. Also GDEMU seems a non option.
So for version 2 Dreamcast what are options to fix the gd rom ? Thanks.
Dreamcast HKT-3020
Manufactured October 2000
Version 2 NTSC
Last edited by Xiden on Wed Jul 15, 2020 2:14 pm, edited 1 time in total.
-
- lithium
- Posts: 46
- Dreamcast Games you play Online: Phantasy Star Online v2
Re: Dreamcast v2 GD ROM replacement possible ?
TerraOnion MODE does not work on va2.Xiden wrote:Get a MODE from TerraOnion, its the only replacement device that will work on a v2mscotz wrote:Hello a novice here, of the three versions of DC I seem to have the version 2, where the gd rom is all plastic. My DC wont spin discs any more and the screw turn technique worked for a little bit but not anymore. On ebay the replacement gd rom seem like all the ones that just snap into the slot, but version 2 does not seem would work. Also GDEMU seems a non option.
So for version 2 Dreamcast what are options to fix the gd rom ? Thanks.
Dreamcast HKT-3020
Manufactured October 2000
Version 2 NTSC
va2 has the GD-ROM drive controller circuitry built into the motherboard, so it can't be replaced.
- Xiden
- Developer
- Posts: 2225
- Dreamcast Games you play Online: All the DC games!!
Re: Dreamcast v2 GD ROM replacement possible ?
One of their support staff told me it did, but looks like their site now says otherwise|darc| wrote:TerraOnion MODE does not work on va2.Xiden wrote:Get a MODE from TerraOnion, its the only replacement device that will work on a v2mscotz wrote:Hello a novice here, of the three versions of DC I seem to have the version 2, where the gd rom is all plastic. My DC wont spin discs any more and the screw turn technique worked for a little bit but not anymore. On ebay the replacement gd rom seem like all the ones that just snap into the slot, but version 2 does not seem would work. Also GDEMU seems a non option.
So for version 2 Dreamcast what are options to fix the gd rom ? Thanks.
Dreamcast HKT-3020
Manufactured October 2000
Version 2 NTSC
va2 has the GD-ROM drive controller circuitry built into the motherboard, so it can't be replaced.
-
- rebel
- Posts: 20
- Contact:
Re: Dreamcast v2 GD ROM replacement possible ?
If the laser or spindle motor has failed then the best course seems to scavenge them from a PC CD-ROM drive, as the DC-specific models are out of production. Apparently those from CD-Master 48e (SC-148) drives work well. It's possible that some of those are dying as well but I reckon they're less likely to be well used.
-
- Fancy Pants Admin
- Posts: 3
Re: Dreamcast v2 GD ROM replacement possible ?
Thanks all for your replies all. I may look for a used drive on ebay to see if that is a possibility or maybe try replacing the laser. Any other suggestions are welcomed. I appreciate all the info given.
-
- rebel
- Posts: 16
- Dreamcast Games you play Online: Blocked ports
Re: Dreamcast v2 GD ROM replacement possible ?
Its possible to make HDD mod, but you need good soldering skills.
-
- Fancy Pants Admin
- Posts: 3
Re: Dreamcast v2 GD ROM replacement possible ?
I have not seen HDD mod on version 2, if you have a link or anything for reference I don't mind giving it a shot, at this point it seems less risky.xzer0PL wrote:Its possible to make HDD mod, but you need good soldering skills.