Hi all!
I know the re are a lot of people asking the same but I can’t figure out how to solve it!
So, I live in Italy but my dreamcast is JAPAN ( i swap the PSU with a Pal one )
I have a Rasp 3 with dreampi ( the last one)
And i use a V.TOP usb modem and the Lights are both green. Sono think everything work...
I see the IP and if i do the ping test I can see the dreampi
But when i try to connect the game ( quake 3 ) said no dial tone..
Any suggestion?
Thanks!!
I MODIFY MY dreamcast With MODE by Terraonion
Sometimes i have a warning “ under-voltage detected”
No Dial Tone :(
Moderator: pcwzrd13
- louis012345678
- Doom
- Posts: 187
- Dreamcast Games you play Online: Yes
- Location: Manchester, UK
- Contact:
Re: No Dial Tone :(
Are you using a line voltage inducer or just a standard phone cable? If you're just using a regular phone cable then it won't work as there is no voltage being passed down the phone line, hence the 'no dial tone' and 'under-voltage detected' errors you've been getting.
I make music for old consoles ^_^
http://louistheseganerd.atwebpages.com
http://www.youtube.com/c/louistheseganerd
http://louistheseganerd.atwebpages.com
http://www.youtube.com/c/louistheseganerd
-
- shadow
- Posts: 5
Re: No Dial Tone :(
In using a standard phone cable, I understood that i need only that cause my console is NTSC\JAP.
Is The line voltage inducer for pal only?
Is The line voltage inducer for pal only?
-
- shadow
- Posts: 5
- Xiden
- Developer
- Posts: 2225
- Dreamcast Games you play Online: All the DC games!!
Re: No Dial Tone :(
U might pm pcwzrd13 he can quickly diagnose and fix your issue. Pal modems do require more voltage to use than ntsc modems
-
- shadow
- Posts: 5
Re: No Dial Tone :(
When you said pal modem do you Mean the internal modem of the dreamcast ? Cause is NTSC the dreamcast. Il try to pm @pcwzrd13!!
- Jako
- Sunday Shootout
- Posts: 664
- Dreamcast Games you play Online: ChuChuRocket
Planet Ring
Quake 3
Maximum Pool
PSO v2
Next Tetris
4x4 Evo
Starlancer...
Re: No Dial Tone :(
Hi!!! Every Dreampi needs power, the Pal more than the NTSC ones, but the LVI is needed too to emulate the dial tone. I used ago a time a Jap Bios moded Dreamcast and worked in the same way, the important is the modem, if is PAL or not to put one voltage or another.
Be Dreamcast My Friend!!!
-
- shadow
- Posts: 5
Re: No Dial Tone :(
Update: pcwzrd13 send me the new router with the Line voltage for PAL.
I tried to connect and the dial now works.
But i still not be anke to play
Error in QUAKE III : no master server
Error in PSO V2: you could not be connected to the server... check that your provider settings are correct.
Error in planet web: the host is not responding
I use the settings from this video https://youtu.be/2iGMSXWcWXU
I tried to connect and the dial now works.
But i still not be anke to play
Error in QUAKE III : no master server
Error in PSO V2: you could not be connected to the server... check that your provider settings are correct.
Error in planet web: the host is not responding
I use the settings from this video https://youtu.be/2iGMSXWcWXU