USB4MAPLE adapter

[megavolt85]

Hori Wireless Fight Stick 3 still reporting this

when pressing buttons, the line with their status is displayed?

ChImp reports the following

based on the log, it should work correctly, I don't understand what's going on with it, maybe it transmits something else that we don't see in the log

[Jaxel]

Hori Wireless Fight Stick 3 still reporting this

when pressing buttons, the line with their status is displayed?

Code: Select all

01 00 0F 80 80 80 80 00 00 00 00 00 00 00 FF 00 00 00 00 - BUTTON 1 (square)
02 00 0F 80 80 80 80 00 00 00 00 00 00 FF 00 00 00 00 00 - BUTTON 2 (cross)
04 00 0F 80 80 80 80 00 00 00 00 00 FF 00 00 00 00 00 00 - BUTTON 3 (circle)
08 00 0F 80 80 80 80 00 00 00 00 FF 00 00 00 00 00 00 00 - BUTTON 4 (triangle)
10 00 0F 80 80 80 80 00 00 00 00 00 00 00 00 FF 00 00 00 - BUTTON 5 (L1)
20 00 0F 80 80 80 80 00 00 00 00 00 00 00 00 00 FF 00 00 - BUTTON 6 (R1)
40 00 0F 80 80 80 80 00 00 00 00 00 00 00 00 00 00 FF 00 - BUTTON 7 (L2)
80 00 0F 80 80 80 80 00 00 00 00 00 00 00 00 00 00 00 FF - BUTTON 8 (R2)
00 01 0F 80 80 80 80 00 00 00 00 00 00 00 00 00 00 00 00 - BUTTON 9 (select)
00 02 0F 80 80 80 80 00 00 00 00 00 00 00 00 00 00 00 00 - BUTTON 10 (start)
00 10 0F 80 80 80 80 00 00 00 00 00 00 00 00 00 00 00 00 - BUTTON 13 (home)

00 00 00 80 80 80 80 00 00 FF 00 00 00 00 00 00 00 00 00 - HAT-U (D-PAD)
00 00 01 80 80 80 80 FF 00 FF 00 00 00 00 00 00 00 00 00 - HAT-UR (D-PAD)
00 00 02 80 80 80 80 FF 00 00 00 00 00 00 00 00 00 00 00 - HAT-R (D-PAD)
00 00 03 80 80 80 80 FF 00 00 FF 00 00 00 00 00 00 00 00 - HAT-DR (D-PAD)
00 00 04 80 80 80 80 00 00 00 FF 00 00 00 00 00 00 00 00 - HAT-D (D-PAD)
00 00 05 80 80 80 80 00 FF 00 FF 00 00 00 00 00 00 00 00 - HAT-DL (D-PAD)
00 00 06 80 80 80 80 00 FF 00 00 00 00 00 00 00 00 00 00 - HAT-L (D-PAD)
00 00 07 80 80 80 80 00 FF FF 00 00 00 00 00 00 00 00 00 - HAT-UL (D-PAD)

[megavolt85]

test Hori Wireless Fight Stick 3

[Jaxel]

test Hori Wireless Fight Stick 3

Working perfectly.

[Jaxel]

test Hori Wireless Fight Stick 3

The ChImp Board seems to be working with this build too!

[RazorX]

VM2 & USB4Maple Organiser v0.13 Update (10/04/2025)
viewtopic.php?p=194223

• Renamed the main database to 'Standard.dat' and 'Custom.dat' is now blank and is only used for when you want to add your own entries.

• Added a button in settings to allow you to update the 'Standard.dat' and 'GID.dat' databases, That way i can keep them up to date without having to post a new version, Just be sure to update every now and again.

v0.12 and below:
Before extracting v0.13 and overwriting the files, If you have already added custom entries then be sure to move the database to somewhere else first as it will be overwritten with a blank 'Custom.dat' when you overwrite the files from v0.13.
Once you have extracted v0.13 you can add your custom entries back into the now blank 'Custom.dat' and everything should be good.
NOTE when updating the databases through the app, It will only update 'Standard.dat' and 'GID.dat', It will not touch the 'Custom.dat' so don't worry about your custom entries going forward.

[megavolt85]

The ChImp Board seems to be working with this build too!

it's very strange because i didn't do anything for chimp

[TurboAleman]

Hi Megavolt, working on similar Project but struggling to get usb host working good, I have used PicoUsb lib and Tyni but looks like these are to slow, do you have any advice for me? To much appreciated.

[megavolt85]

to be honest I don't even know how to help, I use the same libraries as you, the only change in tinyusb that I made is xinput support.

[TurboAleman]

to be honest I don't even know how to help, I use the same libraries as you, the only change in tinyusb that I made is xinput support.

Thanks for the info! At least now I know Tiny usb should work and I’m doing something wrong