USB4MAPLE adapter

[megavolt85]

the GP2040 project is focused on making arcade sticks, so i didn't make any modes for it in usb4maple, it will always be detected as an arcade stick.
i can't add analog and D button support to the arcade stick, because some games won't consider such a controller as an arcade stick.
the original arcade stick has only the stick itself, six buttons A,B,C,X,Y,Z and a START button, all these elements are specified in the device configuration, if i change the configuration, some games will stop recognizing it as an arcade stick.

- Do you have a Kofi/Paypal/Venmo?

it doesn't work in my country my paypal account is frozen with all funds on it

[Paxtez]

@megavolt85

I had assumed that you specified the mappings... When you see X data, send Y dreamcast code.

So it's not possible to say (for this GP2040 mode as an example);

If I see:
- 00 00 00 00 08 80 00 80 80: UP [Left Analog]
or
- 00 00 01 00 00 80 80 80 80: UP [D Pad]

Send <DC code for Up>.

Basically the same as it works when in twin stick mode.

On most fight sticks there is setting that says which input mode the stick sends directional input, but not all of them. Some the stick is mapped to the dpad, some it is mapped to the left analog. Some GP2040 sticks might have it one mode or another and the user might not know how to change it.

Currently with the recent build the directional inputs only work if it is in dpad mode, it would be a nice quality of life feature if it it worked for either.

Since I'm able to put any connected controller into "twin stick" dreamcast controller mode. I had assumed that the "dreamcast device emulation" was independent of which which USB device was detected. Can't it be enabled where any device (PS3/PS4/PS5/Switch Pro controller/etc.) could be put into "arcade stick mode"?

Have you considered opening the source up so the community would be able to update add new device support?

If those payment methods don't work, is there any ones that would work where you are at?


Thanks!

the GP2040 project is focused on making arcade sticks, so i didn't make any modes for it in usb4maple, it will always be detected as an arcade stick.
i can't add analog and D button support to the arcade stick, because some games won't consider such a controller as an arcade stick.
the original arcade stick has only the stick itself, six buttons A,B,C,X,Y,Z and a START button, all these elements are specified in the device configuration, if i change the configuration, some games will stop recognizing it as an arcade stick.

- Do you have a Kofi/Paypal/Venmo?

it doesn't work in my country my paypal account is frozen with all funds on it

[megavolt85]

Apparently I misunderstood you, the left stick and HAT were mapped to the DC D-PAD

usb4maple(19.05.25).7z

(57.64 KiB) Downloaded 4 times