I've had a look through your TV's manual and it states it can support 60hz signals. If the image is stable and it's just the colours that are off, you may wish to run a problem game and try the following:
Support > Self Diagnosis > Picture Test
https://www.manualslib.com/manual/10668 ... l?page=122
Picture > Advanced Settings > Colour Space > Auto
https://www.manualslib.com/manual/10668 ... ml?page=88
Dreamcast video issue
-
- MicroMidget
- Posts: 436
Re: Dreamcast video issue
My Metropolis Street Racer Blog: http://www.msrdreamcast.blogspot.com
MSR ghosts/time trials and official DLC: https://www.dreamcastlive.net/metropoli ... r-dlc.html
MSR ghosts/time trials and official DLC: https://www.dreamcastlive.net/metropoli ... r-dlc.html
- Farmhouse
- lithium
- Posts: 36
- Dreamcast Games you play Online: PSO V2
4X4 EVO
The Next Tetris
Quake 3 Arena
Re: Dreamcast video issue
I've never heard of being able to use a composite source with a component input.
I'm pretty sure this is your issue.
I'm pretty sure this is your issue.
-
- MicroMidget
- Posts: 436
Re: Dreamcast video issue
It's normal when there are no composite inputs. The yellow video plug goes into the green "Y" socket.Farmhouse wrote:I've never heard of being able to use a composite source with a component input.
I'm pretty sure this is your issue.
My Metropolis Street Racer Blog: http://www.msrdreamcast.blogspot.com
MSR ghosts/time trials and official DLC: https://www.dreamcastlive.net/metropoli ... r-dlc.html
MSR ghosts/time trials and official DLC: https://www.dreamcastlive.net/metropoli ... r-dlc.html
- Farmhouse
- lithium
- Posts: 36
- Dreamcast Games you play Online: PSO V2
4X4 EVO
The Next Tetris
Quake 3 Arena
-
- shadow
- Posts: 6
Re: Dreamcast video issue
Good news!
I've accidentally stumbled upon a solution today.
Mainly thanks to rjay63 who told me my Samsung led tv probably does support 60hz and was telling Farmhouse that using a composite source with a component input IS possible (i.e a yellow video plug going into the green "Y" socket)
Just to make sure I hadn't done anything retarded myself, I checked all the inputs by removing them.
http://dreamcast-talk.com/forum/downloa ... ew&id=3150
Then plugged the yellow cable back into the same input.
http://dreamcast-talk.com/forum/downloa ... ew&id=3151
Which apparently automatically fixes the problem...
http://dreamcast-talk.com/forum/downloa ... ew&id=3149
http://dreamcast-talk.com/forum/downloa ... ew&id=3148
Long story short: unplug yellow component cable, wait 3 seconds, plug it back in, and voilà!
I've accidentally stumbled upon a solution today.
Mainly thanks to rjay63 who told me my Samsung led tv probably does support 60hz and was telling Farmhouse that using a composite source with a component input IS possible (i.e a yellow video plug going into the green "Y" socket)
Just to make sure I hadn't done anything retarded myself, I checked all the inputs by removing them.
http://dreamcast-talk.com/forum/downloa ... ew&id=3150
Then plugged the yellow cable back into the same input.
http://dreamcast-talk.com/forum/downloa ... ew&id=3151
Which apparently automatically fixes the problem...
http://dreamcast-talk.com/forum/downloa ... ew&id=3149
http://dreamcast-talk.com/forum/downloa ... ew&id=3148
Long story short: unplug yellow component cable, wait 3 seconds, plug it back in, and voilà!
-
- MicroMidget
- Posts: 436
Re: Dreamcast video issue
Good to hear you found a solution. Maybe your TV cannot change between PAL and NTSC colour systems on the fly. I think setting the colour system to "Auto" may also prevent this in the future.
My Metropolis Street Racer Blog: http://www.msrdreamcast.blogspot.com
MSR ghosts/time trials and official DLC: https://www.dreamcastlive.net/metropoli ... r-dlc.html
MSR ghosts/time trials and official DLC: https://www.dreamcastlive.net/metropoli ... r-dlc.html
- lastcallgames
- Vagabond
- Posts: 746
Re: Dreamcast video issue
It's not uncommon, usually the back of the TV will have something like thisFarmhouse wrote:I've never heard of being able to use a composite source with a component input.
I'm pretty sure this is your issue.

Other times it will have a composite port, but it and the component have to share audio ports.
My tumblr: http://lastcallgames.tumblr.com/
My Youtube: https://www.youtube.com/channel/UCWFa7a ... US-dBdPIMA
My Youtube: https://www.youtube.com/channel/UCWFa7a ... US-dBdPIMA
-
- Similar Topics
- Replies
- Views
- Last post
-
- 0 Replies
- 3313 Views
-
Last post by Sandancer
-
- 2 Replies
- 3275 Views
-
Last post by NapsterBad
-
- 5 Replies
- 3493 Views
-
Last post by Mr.Marshall
-
- 0 Replies
- 2002 Views
-
Last post by Odyssey113
-
- 2 Replies
- 2978 Views
-
Last post by mistamontiel