Page 2 of 4
Re: Sega Clay Challenge
Posted: Sat Dec 19, 2020 5:09 pm
by shano
Ian Micheal wrote:shano wrote:Anthony817 wrote:No CRT and not enough room where I live to set one up.
True, yeah the CRT's can take up some serious space but I have seen some PC CRT's that are quite small in overall size too.
I mostly play my Dreamcast on a Dell P1130 Trinitron VGA Monitor and it looks incredible on that. But even on a SDTV it still looks great.
The 2 Light Guns I own Official Sega Gun & Mad Catz Gun are not the most accurate though unfortunately. They seem kinda hit and miss, jittery and such, maybe I just got unlucky.
''
It's been known pc Monitors to cause some of these guns to act like this.. I can tell you the madcatz gun on a old sd crt tv was very stable no jitter.. so it's not the gun your having a problem with..
Tested on both a SD CRT TV and PC CRT same issues. =/
I did hear that is two revisions of the Mad Catz gun and i got the newer worse revision. But the Official SEGA Gun also has similar issues. Seems like a bit of a lottery. I will run both guns through the paces again soon actually on both SDTV & VGA.
Re: Sega Clay Challenge
Posted: Sat Dec 19, 2020 5:38 pm
by ateam
Thank you for the ongoing work, megavolt85!
I wanted to share a version of this GDI with a custom disc art PVR inserted.
Sega Clay Challenge [GDI].zip
https://drive.google.com/file/d/1lByK9r ... sp=sharing
Re: Sega Clay Challenge
Posted: Sat Dec 19, 2020 5:47 pm
by javierv14
Nice, working on Redream....
Re: Sega Clay Challenge
Posted: Sat Dec 19, 2020 6:11 pm
by Ian Micheal
shano wrote:Ian Micheal wrote:shano wrote:
True, yeah the CRT's can take up some serious space but I have seen some PC CRT's that are quite small in overall size too.
I mostly play my Dreamcast on a Dell P1130 Trinitron VGA Monitor and it looks incredible on that. But even on a SDTV it still looks great.
The 2 Light Guns I own Official Sega Gun & Mad Catz Gun are not the most accurate though unfortunately. They seem kinda hit and miss, jittery and such, maybe I just got unlucky.
''
It's been known pc Monitors to cause some of these guns to act like this.. I can tell you the madcatz gun on a old sd crt tv was very stable no jitter.. so it's not the gun your having a problem with..
Tested on both a SD CRT TV and PC CRT same issues. =/
I did hear that is two revisions of the Mad Catz gun and i got the newer worse revision. But the Official SEGA Gun also has similar issues. Seems like a bit of a lottery. I will run both guns through the paces again soon actually on both SDTV & VGA.
It might be as well when i did this testing these guns were brand new and i was using pal tv and dreamcast
Re: Sega Clay Challenge
Posted: Sun Dec 20, 2020 12:42 am
by MoeFoh
Re: Sega Clay Challenge
Posted: Sun Dec 20, 2020 7:07 am
by spoonrage
Thanks megavolt, much appreciated
Re: Sega Clay Challenge
Posted: Sun Dec 20, 2020 8:22 am
by RazorX
my custom covers and pvr.
Re: Sega Clay Challenge
Posted: Mon Dec 21, 2020 7:25 am
by freakdave
Thank you for the release!
Here's some attract mode footage:
https://youtu.be/wp8Ebo69YbQ
Re: Sega Clay Challenge
Posted: Tue Dec 22, 2020 3:29 pm
by fafadou
@megavolt85 is it possible to add a standard controller version than lightgun ? For the 3 atomiswave gamesthat need it ?
Because they are few people to have one unfortunately...
If yes, do you have planed to do it ?
Else there is some atomiswave games to convert left ?
Re: Sega Clay Challenge
Posted: Tue Dec 22, 2020 3:42 pm
by megavolt85
fafadou wrote:@megavolt85 is it possible to add a standard controller version than lightgun ?
no
fafadou wrote:Else there is some atomiswave games to convert left ?
there are three more games that I plan to port, but since porting is a monotonous process that quickly tires you, I decided to take a break and as a rest I chose parsing the GDMENU code