Dreamcast-Talk.com

the wvdialconf last result tells that the modem is there, but in use. So maybe ready to dial.

Just to make sure, perform this:

sudo service dreampi stop
wvdialconf

then get the new result.

then reboot the raspberrypi , wait 3 minutes, and look if the data light is up.

please update the repository:

https://www.dreamcast-talk.com/forum/vi ... 14#p180814

and perform :

sudo apt-get update
sudo apt-get upgrade

I had my Pi updated and I performed the command. It now detects my modem. The data light lights up, but it did that before too.

I tried connecting to the internet again, but my Dreamcast couldn´t connect. The modem itself doesn´t seem to respond to that attempt.

Hey good, the modem is ready to go, nice.

But, where is the LVI circuit? Have you built one? Internal LVI inside the modem with a dc-dc step-up converter or external LVI in the RJ11 cable cord?

the line needs 9v if your dreamcast modem is NTSC and 18v if PAL/JP. Anyway, 18v fits every case good.

I have a PAL Dreamcast. I recently got an LVI that supplies 18v from Dreamcast Live shop. I got the USB plugged in my Pi, so it should be getting power. I have checked for voltage with my multimeter and I got 18 volts.

fifich wrote:I have a PAL Dreamcast. I recently got an LVI that supplies 18v from Dreamcast Live shop. I got the USB plugged in my Pi, so it should be getting power. I have checked for voltage with my multimeter and I got 18 volts.

ok now is more strange.

Do you have discord or similar by any chance?

Ok, so after some tinkering with Scrivani, we managed to make it work. I had to change some settings and replace dreampi.py file with custom made one for the modem.

Here is the link for the modified dreampi.py file: https://raw.githubusercontent.com/scriv ... berrypi.py

USRobotics USR5637 (white) **after firmware update**
>> This is the updated script

https://github.com/scrivanidc/dreampi_c ... berrypi.py


External Serial USRobotics 56K V.92 Modem - Analog Voice feature hack
>> This is the updated script

https://github.com/scrivanidc/dreampi_c ... berrypi.py

***KDDI/Sega Saturn games connection not implemented. Other features are aligned with 1.9 version ***

Hello!
I would like to add this:

214 Driver Modem Esterno, Doppia Porta Modem fax USB2.0 56K per Win 7 / Win 8 / Win 10 / Win XP, Supporto ID chiamante, Composizione Automatica

https://www.amazon.it/dp/B08ZJ4H7FJ?ref ... asin_title






It works perfectly! It's based on FU07 hardware.


Thanks a lot for your help!


Max