Page 11 of 15
Re: Doom 64 is heading to the Dreamcast
Posted: Wed Jan 08, 2025 3:50 am
by fafadou
xaeroxcore wrote: ↑Tue Jan 07, 2025 7:58 pm
How can turn this Doom 64 CDI into a Iso or GDI which can run on Latest Dreamshell SD Serial Port?
Check dreamshell official forum.
Re: Doom 64 is heading to the Dreamcast
Posted: Thu Jan 09, 2025 11:28 pm
by retro
Hya wrote: ↑Mon Jan 06, 2025 7:25 pm
But lucky for you, I've written Makefiles to automate/simplify the build process:
https://github.com/hcartiaux/doom64-dc-makefile/
Someone has even contributed a Dockerfile, if you cannot manage to build on your system, it should work in all cases inside an Ubuntu 24.04 container.
Thanks! Your instructions are significantly easier than the original.
I am building this in a Windows 10 PC with Cygwin Terminal and Docker Desktop installed.
However, I am getting the following error ERROR [4/6] RUN make -C /build/01_kallistios when I ran
docker build -t doom64-dc .
It ended with
ERROR: failed to solve: process "/bin/sh -c make -C /build/01_kallistios" did not complete successfully: exit code: 2
I'm not familiar with Linux nor am I a developer, so I'm not entirely certain what went wrong.
Any advice is much appreciated.
Thank you!
Re: Doom 64 is heading to the Dreamcast
Posted: Sat Jan 11, 2025 8:59 pm
by retro
I figured out how to use WSL and followed the instructions in
https://github.com/jnmartin84/doom64-dc to compile and build DOOM 64.
I validated the MD5 checksums for the Z64 and WAD files before placing them in the
wadtools folder, and proceeded to build it.
The CDI image was generated using mkdcdisc.
Unfortunately, when I try to boot it with my GDEMU it returned the following error
I_Error [Could not load /cd/doom64monster.pal]
I confirm the presence of
doom64monster.pal in the
selfboot folder in
doom64-dc. The MD5 checksum is 6BC2C6C387AA60F42B8968072F170B23.
Not sure where I am going wrong
Re: Doom 64 is heading to the Dreamcast
Posted: Sun Jan 12, 2025 5:37 pm
by MoeFoh
The Wizard has been busy with an all-new (01-12-2025) release. There are some major internal changes, mainly meant to prevent game crashes during long hours of play. The changes are directly to the main branch, so testing will be needed.
https://github.com/jnmartin84/doom64-dc/activity
Re: Doom 64 is heading to the Dreamcast
Posted: Sun Jan 12, 2025 6:32 pm
by peanut_unlimited
retro wrote: ↑Sat Jan 11, 2025 8:59 pm
I figured out how to use WSL and followed the instructions in
https://github.com/jnmartin84/doom64-dc to compile and build DOOM 64.
I validated the MD5 checksums for the Z64 and WAD files before placing them in the
wadtools folder, and proceeded to build it.
The CDI image was generated using mkdcdisc.
Unfortunately, when I try to boot it with my GDEMU it returned the following error
I_Error [Could not load /cd/doom64monster.pal]
I confirm the presence of
doom64monster.pal in the
selfboot folder in
doom64-dc. The MD5 checksum is 6BC2C6C387AA60F42B8968072F170B23.
Not sure where I am going wrong
I've been getting the exact same error message no matter how many times or ways I build the CDI. Figured it was just a compatibility issue with the gdemu.
Re: Doom 64 is heading to the Dreamcast
Posted: Sun Jan 12, 2025 7:08 pm
by megavolt85
peanut_unlimited wrote: ↑Sun Jan 12, 2025 6:32 pm
Figured it was just a compatibility issue with the gdemu.
GDEMU has no compatibility issues, you're just doing something wrong
Re: Doom 64 is heading to the Dreamcast
Posted: Sun Jan 12, 2025 7:12 pm
by peanut_unlimited
megavolt85 wrote: ↑Sun Jan 12, 2025 7:08 pm
peanut_unlimited wrote: ↑Sun Jan 12, 2025 6:32 pm
Figured it was just a compatibility issue with the gdemu.
GDEMU has no compatibility issues, you're just doing something wrong
lol or that!
Haven't been able to figure it out either way. Even now with the elf being provided, all that has to be done is build the CDI so there is less to stuff up, but still zero luck. Also haven't seen many others report the same issue until now, so I assumed it was just me as well.
Re: Doom 64 is heading to the Dreamcast
Posted: Sun Jan 12, 2025 9:49 pm
by manksalot
MoeFoh wrote: ↑Sun Jan 12, 2025 5:37 pm
The Wizard has been busy with an all-new (01-12-2025) release. There are some major internal changes, mainly meant to prevent games crashes during long hours of play. The changes are directly to the main branch, so testing will be needed.
https://github.com/jnmartin84/doom64-dc/activity
And it looks like just implemented VMU management? Wizard is right!
Re: Doom 64 is heading to the Dreamcast
Posted: Tue Jan 14, 2025 6:03 pm
by CORE316
Has anyone had issues with Vibration Packs with Official Controllers , it isn't working for me I run Open Menu and 5.15 GDEMU I doubt this the problem though. I use Official Controller with Official VMU and Official Vibration Packs.
I did note that it has not been tested with other Controllers in description.
"However, this feature has only been tested with a RetroFighters StrikerDC wireless pad."
Re: Doom 64 is heading to the Dreamcast
Posted: Tue Jan 14, 2025 7:47 pm
by fafadou
I have no vibrations too, but didn't try the last release update.