Dreamcast-Talk.com

Some pics of my config

Inviato dal mio SM-G991B utilizzando Tapatalk

Tanino wrote:Would it be compatible with my line inducer set at 18 volt?

yep

Awesome, now we got some pics to work with... and I am now beyond my depth. :/

Hopefully replacing the Dreamcast internet adapter will fix the issue. If not, be sure to let us know. Best of luck bud!

I even bought a new line inducer from Dreamcast live shop, recreated the pi image and still doesn't work

Inviato dal mio SM-G991B utilizzando Tapatalk

Has to be a dreamcast issue. Tested 2 modems and both don't work

Inviato dal mio SM-G991B utilizzando Tapatalk

There is a tool that you can use, to wipe the flash on the Dreamcast itself. IF you want to try that, here's the link. BUT! Please make sure you read everything on this page, and act accordingly. Because, if you don't, you might end up with an official Sega Dreamcast paperweight.

However, I doubt that'll fix the issue. But it's cheaper than buying a whole other console, eh? lol. Either way, it's up to you. Let us know what works for you. It also might be worth reaching out to anyone else you know, who also has a compatible Dreamcast, and give it a try on their systems.

Also, I've seen some stuff in the "Dreamcast Talk" Discord regarding issues connecting. In some cases, it required them to call up the ISP directly to allow it through. It might be worth looking into. It should be in the "Connection Help" section. Regardless, it might be a good idea in general to just join the discord, as you'll most likely get a response much more quickly.

Hello Zoard. Thanks a lot for all ypur help. I finally managed. What I did was to buy a new voltage inducer from dreamcast live and having changed the modem unit. Things now work well. We can close the topic and super thanks!

Inviato dal mio SM-G991B utilizzando Tapatalk

Good to know! I'm glad it all worked. Happy gaming.