Adapter for MAPLE (Release)

[RazorX]

how long of a dc cable have been tested working on it?

i've tested a short one i've made and a full length controller cable (which can be simply unplugged in the controller) and from what i remember both worked but due to the issues it currently has that are firmware related (timing issues) the shorter one was better but i'd test it again for a while with an unmodded full length cable first and see how you go.
just remember you'll have to boot into the bios and make sure it's showed up before you start using it to save too etc.

[joxley192]

What's the best site to get the PCB made in the UK cause I would like to make a couple of them and could u get them work from controller vmu ports or have it just soldered in to the Dreamcast port for a internal mod

[RazorX]

What's the best site to get the PCB made in the UK cause I would like to make a couple of them and could u get them work from controller vmu ports or have it just soldered in to the Dreamcast port for a internal mod

i actually recommend JLCPCB, there really cheap and have pretty fast shipping.
it's who i always use.

[gilvan666]

Thank you very much for the files, I just had 5 pcb of each made. as soon as I put together photos and show.

make sure for the memory card emulator pcb you flash the arcade stick firmware on it in order for it to work.
also the connector i used was JST-5-PTH.

where did you buy it? I didn't find it on aliexpress

[RazorX]

Thank you very much for the files, I just had 5 pcb of each made. as soon as I put together photos and show.

make sure for the memory card emulator pcb you flash the arcade stick firmware on it in order for it to work.
also the connector i used was JST-5-PTH.

where did you buy it? I didn't find it on aliexpress

just search google for a place to buy them, i never use aliexpress for anything.
i buy my stuff from either ebay, amazon or a site such as Farnell etc.

[joxley192]

Would Ur PCB work with the black pill cause I have got one of them laying round somewhere

[RazorX]

Would Ur PCB work with the black pill cause I have got one of them laying round somewhere

if the pinouts are identical and megavolt85's firmware is compatible then it should but that's something you'd have to ask megavolt85

[megavolt85]

Would Ur PCB work with the black pill cause I have got one of them laying round somewhere

no, they are not compatible either by pinout or by firmware

[joxley192]

Alright guess I will have to get a blue pill one then

[RazorX]

Would Ur PCB work with the black pill cause I have got one of them laying round somewhere

no, they are not compatible either by pinout or by firmware

when we gonna see a firmware update to fix the timing wink wink nudge nudge
kidding aside i know how busy you are but i'd love to see it sorted so it's done and dusted