Page 38 of 87
Re: USB4MAPLE adapter
Posted: Fri May 10, 2024 2:45 pm
by MoeFoh
@megavolt85
MAYFLASH F101 ARCADE STICK - D-INPUT
Perfect.
An nice entry-level budget arcade stick for around $40-$45 in the US. Highly recommended.
Re: USB4MAPLE adapter
Posted: Fri May 10, 2024 2:57 pm
by megavolt85
gatoh wrote: ↑Fri May 10, 2024 1:53 pm
Mayflash F300 works! but and with the 240p it detects it as Arcade Stick, but you have to remap some buttons:
test mouse and F300
Re: USB4MAPLE adapter
Posted: Fri May 10, 2024 3:26 pm
by Vespa
sonik wrote: ↑Fri May 10, 2024 1:14 pm
@Vespa using a usb hub to connect both usb cables?
Just tried using a hub and same result, controls lock up until the grey usb lead is taken out, I also tried it with the hub being powered by a separate supply and that setup also exhibited the same issue (not sure this was safe, the DC fan was on even after power off, hub was powering it! O_O). It's not a big deal if vibration doesn't work, it's still an awesome option to have. I've got a Raphnet GC to USB adapter to dump which doesn't have this two lead USB setup so hopefully that will work fine with vibration. Thanks for your help!
Re: USB4MAPLE adapter
Posted: Fri May 10, 2024 4:30 pm
by Vespa
Hori DOA4 Arcade Stick 360
My DOA4 stick was/is in the process of being modded so switches were all taken out of place, I have no idea what the directions are, originally I guessed based on this picture and where the colours are leading to but cross referencing with the Hori RAP stick log, where all other buttons match, this could be wrong. Does anybody else have this stick to confirm the directional inputs once the firmware is up?
They're currently matched to inputs based on the wire colours in this pic from an online guide:
Re: USB4MAPLE adapter
Posted: Fri May 10, 2024 4:49 pm
by megavolt85
Vespa wrote: ↑Fri May 10, 2024 4:30 pm
My DOA4 stick was/is in the process of being modded so switches were all taken out of place, I have no idea what the directions are, originally I guessed based on this picture and where the colours are leading to but cross referencing with the Hori RAP stick log, where all other buttons match, this could be wrong. Does anybody else have this stick to confirm the directional inputs once the firmware is up?
i'm sure what for all x360 compatible is
Code: Select all
00 14 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Up
00 14 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Down
00 14 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Left
00 14 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Right
original x360 controller, Hori RAP and Mad Catz 360 TE use same layout
Re: USB4MAPLE adapter
Posted: Fri May 10, 2024 5:07 pm
by gatoh
megavolt85 wrote: ↑Fri May 10, 2024 2:57 pm
gatoh wrote: ↑Fri May 10, 2024 1:53 pm
Mayflash F300 works! but and with the 240p it detects it as Arcade Stick, but you have to remap some buttons:
test mouse and F300usb4maple(test MyFlash F300, Viperv2Pro).7z
I think you have not attached the correct file, it does not work at all and has a modification date of April 20, 2024.
Is it correct?
Thank you!
Re: USB4MAPLE adapter
Posted: Fri May 10, 2024 5:11 pm
by megavolt85
Vespa wrote: ↑Fri May 10, 2024 4:30 pm
Hori DOA4 Arcade Stick 360
added
gatoh wrote: ↑Fri May 10, 2024 5:07 pm
Is it correct?
ou shit, i'm archived debug version
Re: USB4MAPLE adapter
Posted: Fri May 10, 2024 7:39 pm
by maonaluva
megavolt85 wrote: ↑Thu May 09, 2024 10:26 pm
maonaluva wrote: ↑Thu May 09, 2024 8:53 pm
8bitdo SNES30 Wireless Bluetooth Controller
usb4maple(8bitdo SNES30, PowerA Nintendo Switch ).7z
I just tested, the SNES30 had the X and Y inverted, and the A and B were also inverted.
The PowerA Nintendo Switch worked perfectly, I even tested the second analogue in Quake 3, everything was fine.
Re: USB4MAPLE adapter
Posted: Fri May 10, 2024 10:34 pm
by robinhoodie
Tested the DOA 4 stick. It works perfectly. Thought it won't let me switch to other modes.
I want to add to the supported sticks list. What do I need to generate the log file?
Re: USB4MAPLE adapter
Posted: Sat May 11, 2024 4:30 am
by Vespa
robinhoodie wrote: ↑Fri May 10, 2024 10:34 pm
Tested the DOA 4 stick. It works perfectly. Thought it won't let me switch to other modes.
I want to add to the supported sticks list. What do I need to generate the log file?
Thank you megavolt for adding the stick and robinhoodie for confirming it works. Are arcade sticks supposed to have alt modes?
usb4maple(test MyFlash F300, Viperv2Pro).7z