Dreamcast-Talk.com

megavolt85 wrote: ↑Sat Aug 10, 2024 3:57 pm

Tisse wrote: ↑Wed Aug 07, 2024 3:58 pm Also, would it be possible to add support for GunCon2/other light guns in a future update?

no, it is not possible to support a light gun on the rp2040, there is no free space for this in the PIO module

Hi, megavolt85, you said it is not possible to support a lightgun like guncon, but could be possible to support a modern lightgun who act as mouse+keyboar? like https://github.com/TeamOpenFIRE/OpenFIRE-Firmware ive connected my openfire gun to USB4MAPLE but 240p test suit shows as empty port

Edit with a log file from putty
Edit2: sorry, for the previous log, this one seems to be better.

i can read guncon without problems, but i can't emulate light gun for dreamcast
P.S. i don't have free time until november, you can send logs, i will definitely work on them in november

For the Wiki: Microsoft Intellimouse 3.0 works with USB4MAPLE adapter

Wanted to mention that the following keyboard is tested and working in wireless mode with latest firmware.

Hexgears X5 Wireless Mechanical Keyboard Full Size 108 Keys, Kailh Box 3.0 Blue Switch, Ergonomic, N-Key Rollover, Backlit Gaming Keyboard with Wrist Rest for PC/Tablet/PS/Xbox/Mac/Laptop
https://www.amazon.com/gp/product/B0B3M ... UTF8&psc=1

Can anyone post instructions for dumping logs in order to request support for a specific controller?

I'm asking for a friend who purchased one of these: https://www.gamo2.com/en/index.php?disp ... uct_id=364

To my knowledge, PuTTY and a USB-UART is required. Do you simply start a serial session while the UART is connected to RP board?

Another compatible keyboard. A real "Amazon special"

Bluetooth Keyboard Mouse, Multi-Device Wireless Keyboard Mouse Combo, Ultra Slim, Rechargeable, Dual-Mode(Bluetooth 4.0 + USB), for Windows/Mac OS
https://www.amazon.com/gp/product/B0BMK ... =UTF8&th=1

Just decided to plug up my USB4MAPLE bought from Dreamcast Live and I'm having to trouble getting anything to work. I have it plugged into a UGreen USB hub with which I have a Bluetooth receiver for my keyboard and a USB thumb drive for the VMU. The MAPLE is in port 2 and I have also tried it in other ports too but with no joy. Also there is nothing going to the Bluetooth receiver with power indicator light coming on. Am I missing something here? Is there something I should be doing but I'm not?

Must be missing Firmware. Add it. Here is how ---> http://usb4maple.wikidot.com/

DreamState wrote: ↑Mon Sep 30, 2024 7:33 am I have it plugged into a UGreen USB hub with which I have a Bluetooth receiver for my keyboard

If it's Bluetooth, it's not going to work. A keyboard with a standard 2.4Ghz wireless receiver will work but USB4MAPLE doesn't support Bluetooth adapters.

Indeed it was missing its firmware. It’s been added now. When you say use a 2.4ghz receiver instead, do most wireless keyboard also take this type as well as a Bluetooth one? I have an Akko 3061 wireless.