Another option: Connect two RXEF040 in parallel (with plenty of spacing between the two), thus allowing 800mA of current to pass-through.
And as mentioned, replace with a RXEF090, although the 1.8A trip current makes me nervous.
why on earth would you want to do anything like that when you can use a resettable fuse where if it blows you just turn the console off for like 10 seconds and then it's good to go again.
Another option: Connect two RXEF040 in parallel (with plenty of spacing between the two), thus allowing 800mA of current to pass-through.
And as mentioned, replace with a RXEF090, although the 1.8A trip current makes me nervous.
why on earth would you want to do anything like that when you can use a resettable fuse where if it blows you just turn the console off for like 10 seconds and then it's good to go again.
Why on earth? So the controller board can deliver 800mA of current like it was originally designed to do.
Another option: Connect two RXEF040 in parallel (with plenty of spacing between the two), thus allowing 800mA of current to pass-through.
And as mentioned, replace with a RXEF090, although the 1.8A trip current makes me nervous.
why on earth would you want to do anything like that when you can use a resettable fuse where if it blows you just turn the console off for like 10 seconds and then it's good to go again.
Why on earth? So the controller board can deliver 800mA of current like it was originally designed to do.
i'd rather just buy a 0.9A RXEF090 off ebay or some other site if i needed, or just use the stock fuse providing it's not blown
they're quite easy to get.
I did a quick search and got no hits on this topic, but does dropping the money on a broadband adapter have any real worth outside of online play? I...
Last post
bba is great for quake 3 and almost required for driving strikers.
Good evening, I was moving towards a vga cable, but my tv has no vga input. The only way is a VGAtoHDMI adapter. I wanted to know if the resolution...
Last post
Thanks for the replies, my intention was to take advantage of the native vga signal, also because I didn't want a thousand boxes to look after.
I'll...
