New version of Dreamcast 240p Test Suite is out - v2.02
Posted: Mon Jun 06, 2022 3:27 pm
UPDATE: Version 2.02 has just been released.
- Light gun test
- Stand alone VMU software:
-- VMU controller test
-- VMU MDfourier Test
- HCFR integration for calibration
- Improved Color precision when needed, to ARGB888
- New patterns for color
- Keyboard test
- Microphone test
- Added BIOS and flashrom data viewer and Identification
- Added ISP flashrom Data display
- VMU easter egg animations
- Improves general rendering speed
- Added Convergence test
- Improved Controller Test
Get the download here:
https://artemiourbina.itch.io/240p-test-suite
Update:
Version 1.29
============
- Monoscope by Keith Raney in all resolutions
- Donna by Pepe Salot is now included!
- MDFourier
- Audio Sync Test
- Maple Device Viewer
- Controller Test
- Memory Viewer
- Support on the fly cable changes
- Added missing analog joystick support to menus and help
- Exposed several options to user:
-- Deflicker filter
-- PVR Texture Dithering
-- KOS Video Mode defaults
-- Video Register defaults (KOS/Suite)
- Now stops optical drive upon boot
- VMU messages are now always up to date and refreshed
- Updated 0GDTEX icon
- Updated IP.BIN to reflect release and peripherals
- Added unlicensed text to IP.BIN
- Added several VMU save icons, selected at random
- Added optional VMU eyecatcher graphics to save
- Added warnings and error messages when saving to VMU if there is not enough space
- VMU load only changes video mode if needed
- Fixed color balance in color bars + gray reference
- Added Draw Video Border option to Grid
- Changed 75% RGB levels from 192 to 191 to match spec
- Removed double input from controllers that send duplicate d-pad/analog directions
- Added SD icon to VMU LCD in main menu, he blinks (thanks to Karensauria)
- Sound test follows Dreamcast Mono configuration if set
- Scroll test has selection menu
- Boots into PAL60 if in RGB mode, and not in composite when in PAL
- Added warning for PAL60 color decoding via composite video (old PVMs decode it as NTSC 4.43)
- Improved flashrom data for Region/Broadcast detection, instead of just official combinations
- Improved video mode selection when cable is swapped on the fly
- Added EBU to NTSC and SMPTE to PAL
- Added alternating black bars for LCD lag tests in passive lag test
- Added option to Ignore Frame Buffer creation for overlay graphics
- Reduced Texture Memory usage in RAM
- Uses controller capabilities to properly draw controller test
- Added load from VMU Option
- Added reset all options to defaults
- Renamed Reflex & Timming test and added message upon completing it
- Light gun test
- Stand alone VMU software:
-- VMU controller test
-- VMU MDfourier Test
- HCFR integration for calibration
- Improved Color precision when needed, to ARGB888
- New patterns for color
- Keyboard test
- Microphone test
- Added BIOS and flashrom data viewer and Identification
- Added ISP flashrom Data display
- VMU easter egg animations
- Improves general rendering speed
- Added Convergence test
- Improved Controller Test
Get the download here:
https://artemiourbina.itch.io/240p-test-suite
Update:
Version 1.29
============
- Monoscope by Keith Raney in all resolutions
- Donna by Pepe Salot is now included!
- MDFourier
- Audio Sync Test
- Maple Device Viewer
- Controller Test
- Memory Viewer
- Support on the fly cable changes
- Added missing analog joystick support to menus and help
- Exposed several options to user:
-- Deflicker filter
-- PVR Texture Dithering
-- KOS Video Mode defaults
-- Video Register defaults (KOS/Suite)
- Now stops optical drive upon boot
- VMU messages are now always up to date and refreshed
- Updated 0GDTEX icon
- Updated IP.BIN to reflect release and peripherals
- Added unlicensed text to IP.BIN
- Added several VMU save icons, selected at random
- Added optional VMU eyecatcher graphics to save
- Added warnings and error messages when saving to VMU if there is not enough space
- VMU load only changes video mode if needed
- Fixed color balance in color bars + gray reference
- Added Draw Video Border option to Grid
- Changed 75% RGB levels from 192 to 191 to match spec
- Removed double input from controllers that send duplicate d-pad/analog directions
- Added SD icon to VMU LCD in main menu, he blinks (thanks to Karensauria)
- Sound test follows Dreamcast Mono configuration if set
- Scroll test has selection menu
- Boots into PAL60 if in RGB mode, and not in composite when in PAL
- Added warning for PAL60 color decoding via composite video (old PVMs decode it as NTSC 4.43)
- Improved flashrom data for Region/Broadcast detection, instead of just official combinations
- Improved video mode selection when cable is swapped on the fly
- Added EBU to NTSC and SMPTE to PAL
- Added alternating black bars for LCD lag tests in passive lag test
- Added option to Ignore Frame Buffer creation for overlay graphics
- Reduced Texture Memory usage in RAM
- Uses controller capabilities to properly draw controller test
- Added load from VMU Option
- Added reset all options to defaults
- Renamed Reflex & Timming test and added message upon completing it