Dreamcast-Talk.com

Hello Everyone,

Delighted to join this Dreamcast community and see that the BEST console still lives on to this day!

I'm ecstatic to have found my original Dreamcast and delighted that it still works well.

Back in the day, I played PSO online Pal version constantly using the Blaze Xploder codes - unfortunately I'm unable to locate the codes online now (perhaps they've been removed) is anyone able to direct me to where I might be able to view these, I've tried some web-sights but they don't seem to work?

Many thanks!

Ives' CDIs are the way to be, technical breakthrough! To play in Sylverant. No more GD trashing the laser

Thanks, I was hopeful that I might be able to continue with where I left off before I put my Dreamcast in storage - hoping to be able to max out on every thing using the Xploder disk codes as I did before and have fun with the game like this.

The codes I've found on-line look to be similar to what I had before they're just not working!?

Tread carefully hacked weapons will earn a ban

Unless youse actually playing alone. Ives uses NTSC-U I don't think your PAL SNAK could adapt

I'd play offline but, it's not to mod any weapons that would lead to a potential ban.

Just wondering what's happening for the codes not to work.

I just read an post online that says - PSO v2 recognises Xploder codes unlike the original version ,but this begs the question as to why there are multiple sites online specifically for v2 version codes, I need to keep digging!

PSO Codebreaker Code Maker for DNS:

https://dreamcast-talk.com/forum/viewtopic.php?t=13799

from what I remember we had to use different enable codes than the ones generated by the app.
the dns codes were fine.
it can generate dns codes for each version of dc pso.

if it turns out that the enable codes are not working, you might want to use webarchive and find what enable codes were being used around 2009.
we should also have them listed on this site somewhere, when we hosted the leaked pso server.
obviously the dns codes that would be listed wouldn't be useful (generate your own with the app)

most people use either autoconnect cdi's or the bluecrab patcher disk.
but its good to have all options available.

Here are some of the enable codes i found:
(post more if you find them)

good luck!

Are you able to direct me to the app for generating codes?

Many thanks

KrazyKronk wrote:Are you able to direct me to the app for generating codes?

Many thanks

It was first link in the post i made earlier.

https://dreamcast-talk.com/forum/viewtopic.php?t=13799

KrazyKronk wrote:I just read an post online that says - PSO v2 recognises Xploder codes unlike the original version ,but this begs the question as to why there are multiple sites online specifically for v2 version codes, I need to keep digging!

Generally, keep a separate VMU for your codes. Don't put a PSOv2 save on the same card as your codes or they wont work.
After you have loaded the codes and your game is loading, swap out your VMU to the one with your save file.