Page 1 of 1
pso dc-talkl disc, mopup #3 seems to be sticky~
Posted: Fri Sep 10, 2010 10:17 pm
by Macabre
Not sure if this is common knowledge or work-on-the-backburner, but mopup #3 doesn't seem to want to load. I do have a bad connection so that might be it, but have failed / frozen in place a few times now trying to get the quest to load.
I'll try endless #3 (hunting aluminum badges), and report~
Re: pso dc-talkl disc, mopup #3 seems to be sticky~
Posted: Fri Sep 10, 2010 10:20 pm
by Radkin
Oh, yeah, I couldn't get that to work either. Forgot all about it.
Re: pso dc-talkl disc, mopup #3 seems to be sticky~
Posted: Fri Sep 10, 2010 11:09 pm
by Macabre
Endless works just fine, +2 badges
Re: pso dc-talkl disc, mopup #3 seems to be sticky~
Posted: Fri Sep 10, 2010 11:45 pm
by BlueCrab
Its probably a corrupted/missing/misnamed quest file. I know I can load that quest just fine on my server (at least on PSOPC).
Re: pso dc-talkl disc, mopup #3 seems to be sticky~
Posted: Sat Sep 11, 2010 2:35 am
by Impulse
Thank you for the heads up, Macabre. It's possible that I messed up the quest when configuring. I'll check it out asap.
Re: pso dc-talkl disc, mopup #3 seems to be sticky~
Posted: Sat Sep 11, 2010 12:39 pm
by BlueCrab
I just tried the quest with dcv1 and dcv2, and they both work on my server. Being that Impulse and I both got the quests from the same place, I'm going to guess its a configuration issue on the dctalk server.
Re: pso dc-talkl disc, mopup #3 seems to be sticky~
Posted: Mon Sep 13, 2010 3:23 am
by Impulse
I found out what the problem was. The dc v2 quest file for mop up 3 (q103) was missing in the Fuzziqer Aeon Server (and I must have forgotten about it when configuring). I checked all versions of Aeon to make sure it wasn't my download. So what I did was use the pc quest files and it seems to work fine on dc v2 now.