DreamPi NOOBS-compatible image

Online games, how to get online, and anything involving Dreamcast online can be discussed here.
User avatar
MrTamkis
shadow
Posts: 14
Contact:

Re: DreamPi NOOBS-compatible image

Post#11 » Thu Aug 01, 2019 5:31 pm

dodo1867 wrote:Interesting seems like a great way to get the most out of the raspberry pi when being used for the dreampi


Yeah, Raspberry Pis have a lot of usage for retro game consoles/computers. This was one of the main reasons why I created these images, so you don't have to waste a large capacity SD card for only using a small DreamPi install, and to get the most out of your Raspberry Pi that you've already purchased.

Other interesting retro console/computer usage I've found online for Raspberry Pis:

DreamPi NOOBS-Compatible Image:
Forum thread
Project page

"Industrial-Strength" LVI (DIY)
Forum thread
Blog article

User avatar
MrTamkis
shadow
Posts: 14
Contact:

Re: DreamPi NOOBS-compatible image

Post#12 » Thu Aug 01, 2019 6:28 pm

With the recent release of DreamPi v1.7 DLE, I have updated the Dreampi NOOBS-compatible image today against v1.7 DLE in the OP. Also at my DreamPi NOOBS image webpage, I've added a section detailing how I convert the stock images into NOOBS-compatible ones, if anyone ever finds the need to roll their own images.

Main changes with the new NOOBS image:

  • Updated NOOBS image against v1.7 DLE DreamPi image
  • Updated installer slideshow
    • Added optional WiFi connection to the list of minimum hw requirements
    • Updated list of online-compatible games, and added link to list of online games at Dreamcast Live website
    • Added slide with info about DreamPi Companion app
    • Added slide with info about the DreamPi WiFi Config Wizard
    • Removed slide about the speed bugfix

Next DreamPi NOOBS image release I will look into adding an online auto-update feature.

With NOOBS Full version/PINN, there is a file called recovery.cmdline, which has a repo_list argument which points to an online JSON file. This file points to other online JSON files, which have a master list of distros and parameters for installing/updating distros online.

After hosting the image as an extracted 7z archive on Github, 3 things I could look into for implementing this feature:
  • Contact the NOOBS/PINN authors with the NOOBS image info, have them implement the info into their master list
  • Fork the master list files into my own repo. Keep it same as stock ones, but add my info for the DreamPi image.
  • Modify the local overrides.json file within NOOBS/PINN, by adding the DreamPi image info to it with a shell script during install. This file overrides some of the info within the master list. I'll have to look into if adding a whole new OS that doesn't exist on the master file is possible.

Option 3 would probably be the best way to implement this, if it is possible.
DreamPi NOOBS-Compatible Image:
Forum thread
Project page

"Industrial-Strength" LVI (DIY)
Forum thread
Blog article

User avatar
Bob Dobbs
Sub Genius
Posts: 3523
Contact:

Re: DreamPi NOOBS-compatible image

Post#13 » Fri Aug 02, 2019 12:26 am

How 'bout Kodi?

Lol!
Regards,
Bob Dobbs

MadnessHero
noob
Posts: 2

Re: DreamPi NOOBS-compatible image

Post#14 » Mon Aug 26, 2019 10:31 am

Does the dreampi image have to be added via a Linux computer? I'm using Windows and I can't get pinn to detect it on SD or USB drives.

User avatar
MrTamkis
shadow
Posts: 14
Contact:

Re: DreamPi NOOBS-compatible image

Post#15 » Sun Nov 10, 2019 9:05 pm

Didn't notice that reply until now.

You can use Windows to extract the contents of the NOOBS-compatible DreamPi image archive with 7zip onto the root of an external SD card/USB stick. Make sure the external SD card/USB stick are formatted to FAT32, and that the archive extracts to "os\DreamPi" folder from that device's root, overwriting folders if asked. Then you would just have to install it from the PINN bootloader's OS listing (hold shift on boot). DreamPi should appear as an option and have a different icon indicating that it's to be installed from the external media (a USB icon iirc).

I just noticed a minor mistake in the download, that the archive is not flat :oops:. Odds are it extracted to "DreamPi_1p7_DLE_NOOBS\os\DreamPi" instead of "os\DreamPi\" on the device's root even if extracted correctly, which prevented PINN from seeing the image for install from the external device. I've updated the original download as a flat archive, so that others won't run into the same problem upon proper extraction.
DreamPi NOOBS-Compatible Image:
Forum thread
Project page

"Industrial-Strength" LVI (DIY)
Forum thread
Blog article

User avatar
victoryrhoads
shadow
Posts: 14

Re: DreamPi NOOBS-compatible image

Post#16 » Fri Jan 31, 2020 5:44 am

So I've been trying this a lot of different ways, following the instructions the the T...

I’ve got a Pi3b.

- New SD card, format to FAT32
- Extract PINN download to SD card root
- Download DreamPi image, unzip
- move that "os" folder over to SD root and replace its existing "os" folder
- boot up Pi, install RetroPie, Raspbian Full, and DreamPi.

RetroPie and Raspbian work just fine. Each time I try to boot DreamPi though, the screen goes black and I lose video signal.

Other info:
When I run “Fix” in PINN some of the messages I get are:
In “File System Check”:
fatCP437: Invalid argument

In “re-run partition_setup”:
DreamPidoes not support re-running the setup script.
DreamPi partions_setup.sh script error

DONE - some script errors detected


Not sure if that helps or what it means, but yeah... Any ideas? Thanks in advance.

UPDATE******

I think it may have something to do with me formatting the SD card with macOS. Going to restart the process after reformatting it on Raspbian OS.

UPDATE #2******

Wasn’t able to format via Raspbian OS. Noticed that the Mac was creating ghost files(something it’s infamous for) that once plagued my Phoebe’s SD card- so I tried erasing all of those starting over from scratch; same effect. Blank black screen then video loss. I’m out of ideas.

UPDATE #3*****************

So I bought a 7" Raspberry touch screen display and the DreamPi booted up just fine on that with display. I had been using a HDMI to DVI cord onto my PC monitor. There's good reason to believe that the DreamPi image had been working just fine all along. If you encounter this issue and you don't have an alternate video out method, you could probably setup DreamPi blind(without display) by logging into the Pi and configuring the Wifi.

User avatar
MrTamkis
shadow
Posts: 14
Contact:

Re: DreamPi NOOBS-compatible image

Post#17 » Wed Feb 05, 2020 12:06 am

Wondering if the HDMI to DVI cable (or the Mac "ghost files") may have been causing the problems, or something else breaking down within PINN or the DreamPi image with that particular AV setup.

Unfortunately, my personal DreamPi that I use for using/testing the NOOBS-compatible images I roll is an older, used Model 2B RPi with video out over pure HDMI, so I don't have the means to test for possible hardware bugs such as that in the distro on newer models. If somebody else with a Raspberry Pi 3B (or newer) could replicate that bug from this image (and provide the appropriate log files from within the DreamPi's FS), that would really help with determining the cause, determining if it's not a one-off bug, and help with digging deeper into the issue if so.

For now, I've added a note under a "Known Bugs" section on the DreamPI NOOBS image webpage, the OP, and within the image's ChangeLog file mentioning about this (possible) bug, and to workaround it if it happens using a CSI-2 bridge touchscreen for initial setup and terminal debugging.
DreamPi NOOBS-Compatible Image:
Forum thread
Project page

"Industrial-Strength" LVI (DIY)
Forum thread
Blog article

No1Dopechampion
noob
Posts: 4

Re: DreamPi NOOBS-compatible image

Post#18 » Fri Feb 14, 2020 9:09 am

I have only just discovered this thread, what a useful option to have. Because I am trying a few different methods of an Internal Dreampi, I ended up buying a Pi3 model A (since at time of writing all Pi ZERO seem to be sold out). But for some reason this model I have wont boot a lot of Pre-made SD Images. Only NOOBS seem's to work. I intend to try this out.

  • Similar Topics
    Replies
    Views
    Last post

Return to “Online”

Who is online

Users browsing this forum: No registered users