Addition to compatible modem list

[Scrivani]

the wvdialconf last result tells that the modem is there, but in use. So maybe ready to dial.

Just to make sure, perform this:

sudo service dreampi stop
wvdialconf

then get the new result.

then reboot the raspberrypi , wait 3 minutes, and look if the data light is up.

[Scrivani]

please update the repository:

https://www.dreamcast-talk.com/forum/vi ... 14#p180814

and perform :

sudo apt-get update
sudo apt-get upgrade

[fifich]

I had my Pi updated and I performed the command. It now detects my modem. The data light lights up, but it did that before too.

I tried connecting to the internet again, but my Dreamcast couldn´t connect. The modem itself doesn´t seem to respond to that attempt.

[Scrivani]

Hey good, the modem is ready to go, nice.

But, where is the LVI circuit? Have you built one? Internal LVI inside the modem with a dc-dc step-up converter or external LVI in the RJ11 cable cord?

the line needs 9v if your dreamcast modem is NTSC and 18v if PAL/JP. Anyway, 18v fits every case good.

[fifich]

I have a PAL Dreamcast. I recently got an LVI that supplies 18v from Dreamcast Live shop. I got the USB plugged in my Pi, so it should be getting power. I have checked for voltage with my multimeter and I got 18 volts.

[Scrivani]

I have a PAL Dreamcast. I recently got an LVI that supplies 18v from Dreamcast Live shop. I got the USB plugged in my Pi, so it should be getting power. I have checked for voltage with my multimeter and I got 18 volts.

ok now is more strange.

Do you have discord or similar by any chance?

[fifich]

Ok, so after some tinkering with Scrivani, we managed to make it work. I had to change some settings and replace dreampi.py file with custom made one for the modem.

Here is the link for the modified dreampi.py file: https://raw.githubusercontent.com/scriv ... berrypi.py

[Scrivani]

USRobotics USR5637 (white) **after firmware update**
>> This is the updated script

https://github.com/scrivanidc/dreampi_c ... berrypi.py


External Serial USRobotics 56K V.92 Modem - Analog Voice feature hack
>> This is the updated script

https://github.com/scrivanidc/dreampi_c ... berrypi.py

***KDDI/Sega Saturn games connection not implemented. Other features are aligned with 1.9 version ***

[maxint]

Hello!
I would like to add this:

214 Driver Modem Esterno, Doppia Porta Modem fax USB2.0 56K per Win 7 / Win 8 / Win 10 / Win XP, Supporto ID chiamante, Composizione Automatica

https://www.amazon.it/dp/B08ZJ4H7FJ?ref ... asin_title






It works perfectly! It's based on FU07 hardware.


Thanks a lot for your help!


Max