MAME4ALL CDI Help

[TheMilkMan93]

Just one bad block that may of been auto-fixed - shouldn't stop the disc from at least booting.

You can search and find some good articles on Dreamcast laser calibration.

Aaaaand that fixed it, as well as the few others that did not work the laser adjustment made it all work. thank you alot for the assistance!

Yeah they all need it in time there all dieing

If there's one thing I learned from modding gameboys is that there will always be some guy with alot of knowledge who will 3D print some crazy stuff and boom it's back from the dead. or in my case a guy with a screwdriver and a day off.

[MoeFoh]

Aaaaand that fixed it, as well as the few others that did not work the laser adjustment made it all work. thank you alot for the assistance!

Yeah they all need it in time there all dieing

If there's one thing I learned from modding gameboys is that there will always be some guy with alot of knowledge who will 3D print some crazy stuff and boom it's back from the dead. or in my case a guy with a screwdriver and a day off.

As long as you are playing emulators, give this one a try (GENS4GOOD):
https://www.dreamcast-talk.com/forum/vi ... =gens4good

And remember for the most reliable burns - burn at the slowest speed possible that your drive/cdr media supports.

[Jojo1979]

Hello, I have a other problem with mame4all beta 2. The roms sega system 16 not working for me. The others roms works fine. What is the problem? The iso is downloading on dreamcast talk forum. I play with mame4all beta 2 on dreamshell iso sd. The roms loading and not working.

[Jojo1979]

Finally the roms system 16 works great in mame4all beta 2 on the cdi LDSGA COLLECTION. thanks Landi for the cdi image. It's wonderful. Perfect emulation older arcade games on the dreamcast. Cps1 and system 16 works very well. Nice job.

[dreamcastvalue]

You could try Imgburn.
https://www.imgburn.com/index.php?act=download

After installation, extract this file to the Imgburn install directory for full CDI support.

I'm wondering if it's my LG drive on my PC or maybe it's just like you originally suggested about adjusting the drive. I ran IMGburn and got the same results but I did get some errors:

W 09:37:52 Miscompare at LBA: 17795, Offset: 2072
W 09:37:52 Device: 0x8C
W 09:37:52 Image File: 0xCA
W 09:37:52 Total Errors in Sector: 86
W 09:37:52 Note: The drive probably corrected the EDC Area because it's wrong in the image file.

Not sure if that would cause this but I figured see what you think.

Just one bad block that may of been auto-fixed - shouldn't stop the disc from at least booting.

You can search and find some good articles on Dreamcast laser calibration.