delete

[megavolt85]

open flashrom lock, is test for locked sectors and flashrom device id and manufacture code

this is with no flashrom R512 to 12v wire enabled. So now what i do?

connect 12V and make sure the SYSTEM section is unlocked for writing (SYSTEM RW)

[Conatus]

open flashrom lock, is test for locked sectors and flashrom device id and manufacture code

this is with no flashrom R512 to 12v wire enabled. So now what i do?

connect 12V and make sure the SYSTEM section is unlocked for writing (SYSTEM RW)

i have connected it but it says system RO...why?
maybe an error? it says va0 too but is a va1

[megavolt85]

i have connected it but it says system RO...why?
maybe an error? it says va0 too but is a va1

no it's not a mistake
the board revision data is taken from the flashrom, since your flashrom is erased, the program writes the default value

the SYSTEM section was not unlocked due to low of voltage, or the RESET pin is burnt out

[Conatus]

i fixed it, problem solved, was r512 wire interrupted

[Shinobi-Law]

Hi guys

I have a similar problem with my DC, I have a black swirl
I have upgraded a free bios in it, now more games are booting, Great
but now when I try to reflash the rom it doesn't work even if I put the 12v to R512.

do you know why?

Many Thanks