USB4MAPLE adapter

[MoeFoh]

Not unless they have a d-input mode. And even then the controller output would need debugged and the firmware updated. What are the exact model numbers so we can take a look?

I'm about to test the mouse to see if I can get it to work in a game because I can do that now, but in answer to this specific request, including the name that I get from lsusb:

PDP Afterglow PL-3702.

Code: Select all

Logic3 Afterglow Gamepad for Xbox 360

Hori Gem Pad EX, can't find anything more specific on the controller itself

Code: Select all

ThrustMaster, Inc. Hori Gem Controller for Xbox 360

PDP Versus Fight Pad MS-3660

Code: Select all

Harmonix Music PDP Versus Fighting Pad for Xbox 360

You can use 240p Test Suite for Dreamcast to test your devices. It has a Controller Test section.
https://artemiourbina.itch.io/240p-test-suite

[MoeFoh]

Older smaller USB 2.0 drives seem to work better for the VMU (formatted FAT32).

MoeFoh, is it better to take USB 2.0 for 16 Gb? When formatting flash memory, what cluster size should I specify and what program should I use?

Windows format should work just fine. Quick Format, FAT32, Cluster Size use default.

[Lord*Hypnos]

You can use 240p Test Suite for Dreamcast to test your devices. It has a Controller Test section.
https://artemiourbina.itch.io/240p-test-suite

Pretty expected info from 240p test suite. Not recognizing the 360 pad as even existing, but recognizing the mouse as a Dreamcast Mouse.

Mouse also seems to work fully (along-side OEM Dreamcast keyboard that I've had for years) in Outtrigger. It feels a bit sluggish, but it's probably just that I'm used to higher mouse sensitivity on my PC. I also have rarely ever played FPS/TPS type games.

I ended up finding an OEM 360 wired pad that was significantly cheaper than any receiver and looked to be in good condition (on eBay), so I bought it and will test once I can.