Dreamshell help for noob, hanging on boot screen
Posted: Wed Jun 12, 2019 1:24 pm
Hi all,
My first time posting so I apologise if it's in the wrong forum.
I have modified my dreamcast .
I have dreamshell on an sd card mod from the serial port
I have a 2.5 ide hardrive formatted in fat32 and as primary and set as slave via an adapter.
I've replaced the Gdrom drive with a mod board from dragon city
I'm using no gdrom bios flashed to a new bios chip.
I can boot to dreamshell with no hardrive but as soon as I fit any hard drive it hangs up on the boot screen.
I've attached a photo but the boot screen shows no errors.
I've ordered a CF card and adapter to try my luck another way,
Any help would be appreciated
My first time posting so I apologise if it's in the wrong forum.
I have modified my dreamcast .
I have dreamshell on an sd card mod from the serial port
I have a 2.5 ide hardrive formatted in fat32 and as primary and set as slave via an adapter.
I've replaced the Gdrom drive with a mod board from dragon city
I'm using no gdrom bios flashed to a new bios chip.
I can boot to dreamshell with no hardrive but as soon as I fit any hard drive it hangs up on the boot screen.
I've attached a photo but the boot screen shows no errors.
I've ordered a CF card and adapter to try my luck another way,
Any help would be appreciated