Laser transplant

[Protofall]

I recently got a GDEMU. I own 3 Dreamcasts: a single Model 1 and two Model 0's. I've read that a GDEMU will only work safely in a Model 1 due to voltage differences, so I'll install it in that one.

However the laser in my Model 1 isn't completely dead yet whereas the laser in one of my Model 0's is totally dead. I know I can't transplant the entire Disk Drive because of the voltage difference issue, but I've know the laser head can be separated from the rest of the drive. Can I transplant just the laser head from my Model 1 into my Model 0 and have it work safely?

[megavolt85]

ATA device compatibility with 3.3 and 5V logic level
GD-ROM is standart ATA device

[Protofall]

ATA device compatibility with 3.3 and 5V logic level
GD-ROM is standart ATA device

So you're saying I can just swap the entire drive no problem and by that logic that means the GDEMU isn't a standard ATA device?

[megavolt85]

GDEMU isn't a standard ATA device?

GDEMU does not meet ATA specification on many points

[butoia]

GDEMU isn't a standard ATA device?

GDEMU does not meet ATA specification on many points

Terraonion MODE have level translators, and can be used on va0 and va1 without issue. At now i think is the only ode for va0. But cost around 200€...