f355fanatic wrote: ↑Tue May 13, 2025 12:36 pm To the developers
Is there a USB4maple for PS1/PS2?
I have a PS2 and PS1 racing games that can be played with a NeGcon controller and steering wheel, but they're not compatible with the DualShock 2.
I wanted to know if there was an adapter to allow me to play them with a DualShock 2, or better yet, a PC steering wheel like my G25.
No one thought of it, or is it just not interesting?
USB4MAPLE adapter
- sonik
- Developer
- Posts: 238
Re: USB4MAPLE adapter
Like this? https://www.youtube.com/watch?v=2hf1m3sUeZY
EDF! EDF! EDF!
- f355fanatic
- lithium
- Posts: 36
- Dreamcast Games you play Online: F355, Daytona USA, Alien Front Online, Worms World Party...
- Location: FR
Re: USB4MAPLE adapter
Yes ! Is it your adapter? Where can I find out?Like this? https://www.youtube.com/watch?v=2hf1m3sUeZY
- sonik
- Developer
- Posts: 238
Re: USB4MAPLE adapter
It's not released yet. Bit complex to build as it requires voltage conversion...
PS1/PS2 can supply 3.3v and ~7.5v, but USB devices requires 5v. For my board, I've been using a step down converter to go from ~7.5v to 5v.
If you really want to build one, I can share the WIP firmware and the wiring instructions. Send me a PM.
PS1/PS2 can supply 3.3v and ~7.5v, but USB devices requires 5v. For my board, I've been using a step down converter to go from ~7.5v to 5v.
If you really want to build one, I can share the WIP firmware and the wiring instructions. Send me a PM.
EDF! EDF! EDF!
- RazorX
- Prince of Persia
- Posts: 348
Re: USB4MAPLE adapter
did you make a pcb or just breadboard it?sonik wrote: ↑Wed May 14, 2025 6:56 pm It's not released yet. Bit complex to build as it requires voltage conversion...
PS1/PS2 can supply 3.3v and ~7.5v, but USB devices requires 5v. For my board, I've been using a step down converter to go from ~7.5v to 5v.
If you really want to build one, I can share the WIP firmware and the wiring instructions. Send me a PM.
if you wanted, i could maybe look at designing a pcb
- sonik
- Developer
- Posts: 238
Re: USB4MAPLE adapter
No pcb. Just the pico and some wires.
Thanks but I'm not actively working on it anymore.
Thanks but I'm not actively working on it anymore.
EDF! EDF! EDF!
- f355fanatic
- lithium
- Posts: 36
- Dreamcast Games you play Online: F355, Daytona USA, Alien Front Online, Worms World Party...
- Location: FR
Re: USB4MAPLE adapter
Thank you very much. This will be for my personal use only.sonik wrote: ↑Wed May 14, 2025 6:56 pm It's not released yet. Bit complex to build as it requires voltage conversion...
PS1/PS2 can supply 3.3v and ~7.5v, but USB devices requires 5v. For my board, I've been using a step down converter to go from ~7.5v to 5v.
If you really want to build one, I can share the WIP firmware and the wiring instructions. Send me a PM.
- RazorX
- Prince of Persia
- Posts: 348
Re: USB4MAPLE adapter
if you want, you could send me the schematic and i could throw something small together for anyone who wants to use it
-
- Similar Topics
- Replies
- Views
- Last post
-
- 14 Replies
- 10858 Views
-
Last post by RazorX
-
- 3 Replies
- 3355 Views
-
Last post by Holsten
-
- 5 Replies
- 8051 Views
-
Last post by segalover08
-
- 0 Replies
- 1897 Views
-
Last post by bshi02
-
- 3 Replies
- 7033 Views
-
Last post by Aleron Ives